Post your LIFTED pix here!

[FactoryRide]

I'll definitely have to look into those when it gets a little bit closer to buying. Those look good without the bolts. Weight isn't too bad either. Six Shooters weight a tad over 22lbs from the emails I got from Dustin over at FNwheels.

Thanks for the link!

 

[SiRyan]

in it

pre/post pics. first mod 3" lift. very happy with the results so far. The 4runner doesn't seem so "floaty" after the upgrade. "Nose dive" effect on harsh braking drastically decreased. Toytec 3/2, spacer/coils. thank you.

 

[Mytoy4]

progress! New method mr301s: 17x8.5, 4.75" bs, 0 offset. I love these wheels! They are perfectly flush with the mud-guards and look great. The +1.5" width makes the 275s look pretty good.....still leaning toward upsizing to 285s though. Bigger is always better, right :shrug:
View attachment 74804

View attachment 74803

sexy!!

 

[SixBolt]

Here's a couple more pics of my TE with Toytec 2.5/1.5 spacer lift, and 285 Duratracs.

 

[jbstrd]

Some updated pics of my ride with new wheels and tires. 17x9 US Wheels Stealth Crawlers with 1 1/4" wheel spacers on 285/70-17 BFG KM2's. Sorry about the lighting in the pics. I already posted these on my other thread but I thought they would be at home here in the LIFTED thread as well.

 

[FactoryRide]

Some updated pics of my ride with new wheels and tires. 17x9 US Wheels Stealth Crawlers with 1 1/4" wheel spacers on 285/70-17 BFG KM2's. Sorry about the lighting in the pics. I already posted these on my other thread but I thought they would be at home here in the LIFTED thread as well.

Truck looks great!

 

[SiRyan]

Lets see what you came up with. Don't see too many red SR5's undergoing transformation.
S

last week got the lift, this week got the wheel/tire mounted. Next week, Satoshi and black outs on chromed areas. i really wanna removed the step rails, but old lady is waaay against it.

Pre lift

Lifted

wheels/tires

 

[flying fuzz]

last week got the lift, this week got the wheel/tire mounted. Next week, Satoshi and black outs on chromed areas. i really wanna removed the step rails, but old lady is waaay against it.

Welcome to the Cooper ATP club, I think you'll like them :thumb3:

 

[SiRyan]

Thanks, did all the research and feedback in this forum that led to that combo. so far so good.

 

[cbielat]

Nice combination SiRyan.

 

[Keemonrunnin]

@siryan. If your not gonna be doing a lot of off pavement driving. I would get rid of those side steps and go with n-fabs side steps. Ride was making spacers for the n-fabs to work without cutting the rocker panels. Or you can do what antman did with his.

 

[Hbryanlopez]

Looking good Ryan. I vote remove the step board, maybe some sliders or nfabs for the lady

 

[NorthWest 4R]

Looking good Ryan. I vote remove the step board, maybe some sliders or nfabs for the lady

I vote nice square house buddy!!!

 

[SiRyan]

Thanks, that will be the next main mod. In the meantime, blacking out most of the chrome areas..

 

[THEROK]

Some updated pics of my ride with new wheels and tires. 17x9 US Wheels Stealth Crawlers with 1 1/4" wheel spacers on 285/70-17 BFG KM2's. Sorry about the lighting in the pics. I already posted these on my other thread but I thought they would be at home here in the LIFTED thread as well.

Looks military. Nice. I think it'd look better sans spacers though.

 

[jbstrd]

Looks military. Nice. I think it'd look better sans spacers though.

Yea, I am working on that. I love the wheels, but they are a no go without the spacers. I have already ordered 17x9 Ultra Gauntlets with 4.5" BS and -12mm Offset. I am going to sell these wheels and the spacers. It is my own fault for not researching more.

 

[THEROK]

I like the wheels you have on now better. Be careful with ultras. Got a set new at les schwab and three of them were out of round.

I'd check out the xd strike wheels.

Good luck with everything!

 

[cbielat]

First day of the season over the weekend at Sunday River.

 

[ElegantViolence]

MudN-Snow-Shooting Pics

 

[Romeo from guam]

first 5gen build on guam 6" lift!was built 2 hrs after purchased!