Post your LIFTED pix here!

[Falls]

Nice looking rig !

 

[cbielat]

Too bad some knucklehead cast a shadow in...oh wait...err nevermind.

:rofl:


Looks good Chris! :thumb:

Baahahaha! Thanks Billy! I should have cropped the pictures first.

 

[cmlesschwab]

lifted on 35's

Hopefully in time, they'll come out with a full 6" lift kit.. I'm sure we can fit 35's if we reeeally tried

Yup 35's fit perfect, with minor trimming and fender relocating

 

[thebwlife]

Yup 35's fit perfect, with minor trimming and fender relocating

For future people viewing this they fit fine on the road - but wait untill you flex the suspension you might need new fenders.

 

[WarnerD9]

For future people viewing this they fit fine on the road - but wait untill you flex the suspension you might need new fenders.

So true... Mine are just under 35" and even after lots of trimming they still rub a bit.

 

[adam2562]

wheels

Bought some wheels! :guitar3:

<a href="http://s1137.photobucket.com/user/adam2562/media/IMG_6586_zps33915adc.jpg.html" target="_blank"><img src="http://i1137.photobucket.com/albums/n502/adam2562/IMG_6586_zps33915adc.jpg" border="0" alt=" photo IMG_6586_zps33915adc.jpg"/></a>

<a href="http://s1137.photobucket.com/user/adam2562/media/IMG_6587_zps1110af56.jpg.html" target="_blank"><img src="http://i1137.photobucket.com/albums/n502/adam2562/IMG_6587_zps1110af56.jpg" border="0" alt=" photo IMG_6587_zps1110af56.jpg"/></a>

<a href="http://s1137.photobucket.com/user/adam2562/media/IMG_6579_zps95b6b321.jpg.html" target="_blank"><img src="http://i1137.photobucket.com/albums/n502/adam2562/IMG_6579_zps95b6b321.jpg" border="0" alt=" photo IMG_6579_zps95b6b321.jpg"/></a>

<a href="http://s1137.photobucket.com/user/adam2562/media/IMG_6583_zpsf7a08c03.jpg.html" target="_blank"><img src="http://i1137.photobucket.com/albums/n502/adam2562/IMG_6583_zpsf7a08c03.jpg" border="0" alt=" photo IMG_6583_zpsf7a08c03.jpg"/></a>
I need to paint that inner rusty metal hub.. probably use a rust stopper and then black high temp paint
<a href="http://s1137.photobucket.com/user/adam2562/media/IMG_6580_zps95158ac6.jpg.html" target="_blank"><img src="http://i1137.photobucket.com/albums/n502/adam2562/IMG_6580_zps95158ac6.jpg" border="0" alt=" photo IMG_6580_zps95158ac6.jpg"/></a>

 

[adio3x]

For future people viewing this they fit fine on the road - but wait untill you flex the suspension you might need new fenders.

I'm working on getting a custom fiberglass fender for the fronts when I do go 35s. Rears will need longer bump stops.

 

[granjour]

Man, those 285 Duratracs are hard to beat. They fill well and poke perfect. ya know!:naughty:

 

[TwoDraft]

Finally rid myself of the Yokama Geolanders. Great tire put 46K on them but was time to go. Installed the new Daystar 9134 kit on my Limited and added Cooper Discovery AT/3 275/60R20. Love the look and adjusting to the new ride.

Have one issue so far. The garage I used didn't do an alignment and set the PSI around 40. I have a bad vibration when I go over 55 on the highway. Besides get an alignment, is there anything else I should do or be concerned with.

Doing fender mod later today.

 

[mfregeau20]

Have one issue so far. The garage I used didn't do an alignment and set the PSI around 40. I have a bad vibration when I go over 55 on the highway. Besides get an alignment, is there anything else I should do or be concerned with.

Might need to go back or to a different shop and have them re-balanced.

i had a similar issue.

 

[phillyd2]

I have a bad vibration when I go over 55 on the highway. Besides get an alignment, is there anything else I should do or be concerned with.

Sounds like wheel balance issues instead of alignment. Find a shop that can do road force balance. Even some dealers haver he right equipment.

Btw, truck looks great.

 

[TwoDraft]

Spoke with the shop, he said that he doesn't believe his equipment balancer got it done right. Their going to take it to another shop tomorrow morning. I've heard good things about the shop so going to stick with them for now.

 

[TwoDraft]

Tires balanced, running great. Will work on Fender Liner mod later today. Thanks all.

 

[cmlesschwab]

That's why I can't wait until they come out with some pre-runner style fenders with at least a 2" rise and 2" bulge.

 

[Newf4R]

Finally took the time to wash my rig for a few pics... sorry they were taken with an iPhone.

4 Bilstein 5100s; front set @ 2.5" & Daystar 1.5" spacers in the rear. Wish I did the Bilsteins from day 1. What an unbelievable difference in the ride. Nose dive is no more!!

Thanks [MENTION=84527]FatTiresRollin[/MENTION] & [MENTION=89047]JohnnyA1103[/MENTION] for answering my questions on this set-up.

Before:

After:

 

[Colorado11]

Bilstein 5100's set at .85

Bilstein's on all four corners, also added SpiderTrax. New tires next.

 

[NSW550]

Bilstein's on all four corners, also added SpiderTrax. New tires next.

Do you have a comparison photo that shows spacers?

 

[Boaz]

Here are some before and after spidertraxx pictures.

Also, this lift setup is for sale!!

http://www.toyota-4runner.org/5th-g...-nosedivin-boat-like-drivin-sr5-fellas-2.html

 

[2011T4RLE]

Cleaned her up and took this quick shot.

 

[Colorado11]

I posted before and after pics on the same day in the "what did you do in your......today".

Do you have a comparison photo that shows spacers?