Post your LIFTED pix here!

[4Runner42ofus]

Awesome pics people.....!

 

[Keemonrunnin]

Most recent picture

 

[4runnerNoypi]

I getting my lift/leveling kit 2 inches front and 1.5 in the rear.

Is 285/70/17 will fit my 14 T4r?

Thanks
Joe

 

[TErunner]

http://www.toyota-4runner.org/5th-gen-t4rs/156378-5th-gen-tire-fitment-guide.html

 

[lexmny]

Finally got to take a pic next to a stock silver sr5

Looking good! I like the blacked out trim.. What did you use on the headlights? Paint, plastidip, or replace?

 

[gpracer07]

I can finally post on here! my 2012 T4R

 

[Alex T4R]

I can finally post on here! my 2012 T4R

Welcome. Am i seeing this right you got Texas plates, but location says NJ. Did you move to NJ, if so then we are neighbors.

 

[gpracer07]

Welcome. Am i seeing this right you got Texas plates, but location says NJ. Did you move to NJ, if so then we are neighbors.

Thank you and Ya, I am from Texas, but moved here because of Air Force.

 

[gpracer07]

One from the Side! Loving the new set up.

 

[Mr Mufakka]

One from the Side! Loving the new set up.

Details on the setup?

 

[sn_85]

Details on the setup?

Gonna guess Toytec/Bilsteins by the decals on his car

 

[gpracer07]

Ya I have toytec Ultimate boss 2.5 front and 2.0 rear with or uca, duratrac 285 and wheel spacer

 

[Mokymoks]

2012 4runner sr5 17x9 -12 sidewinders , Bridgestone Duellert at2s 285 70 17, bilsteins all 4 corners 2.5" front and 1.5" rear daystar perfectly level even with 3rd row and some stuff at the back.

 

[DMNHNTR]

Finally got my lift installed. Fox 2.0 Performance series front and rear. Camburg ball joint UCA and Camburg/Sway A Way 1.5 rear coils. 1.25" spacers and 285/70/17 BFG ATs. BajaRack flat utility rack with full mesh.

 

[F1scher]

Finally got my lift installed. Fox 2.0 Performance series front and rear. Camburg ball joint UCA and Camburg/Sway A Way 1.5 rear coils. 1.25" spacers and 285/70/17 BFG ATs. BajaRack flat utility rack with full mesh.

Any other pics? true side view and maybe a front? Im considering the foxs!

 

[DMNHNTR]

I will try to get some better pictures up today. I really like the Fox setup. Very comfortable ride.

 

[DMNHNTR]

Here is a better side view.

 

[DMNHNTR]

Sorry. Couldn't figure out how to do two pics in one post. Nevermind just figured it out. Wasn't patient enough.

 

[USMCRUNNER]

Sorry. Couldn't figure out how to do two pics in one post. Nevermind just figured it out. Wasn't patient enough.

Sweet rig and thank you for your service!

 

[Land_Shark]

Here's my 2014 Trail - 275/70/17 Cooper Discoverer S/T Maxx - 17in ATX Ledges (0mm offset) - Toytec Boss set @ 2.25 Front/2 Rear (I wanted to retain some of the factory rake) - and some anthracite grey plasti-dip on the emblems and bumpers. Tint on front 35%

Budbuilt bumpout sliders are on the way as well as some other parts/protection.

I got the alignment done at High Tech in Chantilly, VA. Those guys took care of me and I worked with [MENTION=99235]Scott@Hightech[/MENTION] who was nice enough to walk me back into the shop and give some pointers for minor corrections after I installed the Boss kit 2 days ago. I'll be sure to see Scott at High Tech if I have any issues in the future, they were great as noted on this forum.

[/URL]~original[/IMG]

[/URL]~original[/IMG]

[/URL]~original[/IMG]