Post your LIFTED pix here!

[sn_85]

Finally got her leveled. Just wanted to say thanks to everyone here.

Went with a Ready Lift 3/2 and 1 inch differential drop (after reading and reading this might not need to be done but for $30 why not) and could not be happier.

Feedback:
Truck looks amazing, finally looks like it should from the factory
Drives better then it did before, no more nose dive when breaking.
Wife loves it.
Have not got it aligned as no pulling is happening but will this weekend. Thanks to my lifetime alignment from Firestone.

You are in dire need of bigger tires!!!

 

[its_mee_pa]

You are in dire need of bigger tires!!!

That's next on the list. But if you want to donate some money to help speed up the process it would be greatly appreciated

 

[cbielat]

Fabian's [MENTION=98488]FTMTK[/MENTION] truck is finally seeing a new suspension set up! Congrats man and welcome to the club.

 

[<<<<]

.

Forgive me for blunt opinion but before looks even and after sags in the back if you look at roof line. I know level look and even wheel well clearance thing and all. Not my cup of tea. Just my 0.02$ since you shared and opened for comments.

 

[its_mee_pa]

It's definitely sagging in the rear... LMAO

 

[jasonv]

ive noticed most people who do 2.5 on the front have distinct and clear reverse rake even though they insist its "level"

 

[Santacruzbro]

ive noticed most people who do 2.5 on the front have distinct and clear reverse rake even though they insist its "level"

I would agree, must do the back of your gonna do the 2.5 in front. I couldn't believe there would be no sag when I did mine so I did the spacer in the rear to make sure

 

[its_mee_pa]

I would agree, must do the back of your gonna do the 2.5 in front. I couldn't believe there would be no sag when I did mine so I did the spacer in the rear to make sure

And that's why I did the same.
2.5 f
1.5 rear

 

[sn_85]

That's next on the list. But if you want to donate some money to help speed up the process it would be greatly appreciated

That's why I went with function over form. Didn't make sense for me to go with a lift with the stock H/T tires. I'd rather have good A/T and get the lift later on.

 

[TevisAaron]

'15 4R TEP w/ 3" Toytec Lift

I haven't been on t4r.org in awhile, but I recently got my 4R lifted and thought I'd post a pic. It is a 3" Toytec lift. I highly recommend this lift. Ride quality is amazing!

 

[cbielat]

Fabian's [MENTION=98488]FTMTK[/MENTION] truck complete and he's already ripping on it:thumb3:

 

[Mistaken]

I would agree, must do the back of your gonna do the 2.5 in front. I couldn't believe there would be no sag when I did mine so I did the spacer in the rear to make sure

And that's why I did the same.
2.5 f
1.5 rear

:cheers:

Great combo for sure!

 

[ADKT4R]

I haven't been on t4r.org in awhile, but I recently got my 4R lifted and thought I'd post a pic. It is a 3" Toytec lift. I highly recommend this lift. Ride quality is amazing!

Aaron I like the look of your setup. What running boards are those?

 

[ADKT4R]

I humbly post my little 3" leveling in the front and 1" rear with Grappler G2s 285/70/r17s. I am in awe of some of your rigs. Next spring I will have to do a real suspension upgrade so I can keep my man card...

Looks great! What leveling kit did you go with?

 

[pauldavis]

Looks great! What leveling kit did you go with?

I need to find out. I have a good friend that owns a tire shop that installed the lift and tires for me. He said it was a 3" front and 1" rear lift. The front spacers look like the ready lift kit but that kit only comes with a 2" rear lift so I don't know if he used something different on the back or if it has a 2" lift in the back. I am going to call him tomorrow and ask.

the height from the ground to the bottom of the tallest point of the wheel well is 38 3/8" rear and 38" front.

 

[takamikey]

Cross-Post

Posted in what I did today, but also sharing here for the lifted folks. Put a 3/2 ReadyLift on my ride today along with some new shoes. Crazy how much different she looks! (Despite the appearance, there's no negative rake, my driveway just slopes down a bit)

 

[pauldavis]

Looks great! What leveling kit did you go with?

It is Truxx leveling kit.

 

[jdtaylor42]

Posted in what I did today, but also sharing here for the lifted folks. Put a 3/2 ReadyLift on my ride today along with some new shoes. Crazy how much different she looks! (Despite the appearance, there's no negative rake, my driveway just slopes down a bit)

Looks great! Just my opinion but I think it would look sick if you plasti-dipped all the chrome pieces in white. Set off the dark grey just like the wheels set off the black

 

[JLRunner]

I new to this forum and just got my first 4runner 2011 charcoal grey. I want it to look literally just like this! definitely looking to get the specs on this bad boy!! *JLRunner*

 

[JLRunner]

Stoked to Get time lifted

Just got a 4runner 2011 charcoal grey.. Will post pics once i get everything started!