Post your LIFTED pix here!

[ranchorat]

Check the icon install sheet. Coilover looks to be too much preload. Also check cv boots.

Mine came with 15 threads showing from icon. I had to add 5 more threads driver side to level it.

Icon recommends 2.13" or less of threads showing

Seems pretty dialed to me. I only have 1.9" of thread showing and its level. 23 threads visible. CV have zero binding at full droop.

 

[GzTEP]

Seems pretty dialed to me. I only have 1.9" of thread showing and its level. 23 threads visible. CV have zero binding at full droop.

Kk guess angle of the picture. Looked more than 2"

 

[KennyArsen]

Pretty badass.
Is that only 2" of lift? It looks way bigger.
JD

3" up front w/2" Icon springs in rear

 

[jjdbike]

3" up front w/2" Icon springs in rear

Thanks bro, why does it look so huge & high? Is it just me?
Like I said, badass but huge looking.
JD

 

[Jabronee]

My trail

Any rubbing issues?

 

[jmswts]

My 4runner posted.View attachment 202302

Have you, or can you post more pics of your rig. I don't think I've seen a MGM with bushwackers

 

[EL3V8TE]

Have you, or can you post more pics of your rig. I don't think I've seen a MGM with bushwackers

I only got this one for now. @magentic4r has a sweet Magnetic with Bushwackers.

 

[96706RROMJP]

Got a Bilstein /Toytec lift make over....

 

[bsprelude]

Here's mines.

Looks good! Can you tell us the details about your lift?

 

[Blue15]

My trail

Looks great, love those rims.

 

[ttlpakg]

Newbie with a lift.

Just picked up a 2016 4R for the wife.
Researched and managed to get 4 Wheel Parts to acquire and install a Procomp 6" lift, 18x9 LRGs on 35s, AMP floorboards. Very satisfied.

 

[KennyArsen]

Thanks bro, why does it look so huge & high? Is it just me?
Like I said, badass but huge looking.
JD

Honestly, I'm not sure. I've gotten that a few times from other people. Also looks like I'm rocking spacers, which I am not. Maybe it was just the lighting/angle. I also used a wide angle lens on my iPhone. Not sure how it compares to others with similar lift height as I have not seen another lifted 5th gen in person...yet

 

[DeepSea]

Honestly, I'm not sure. I've gotten that a few times from other people. Also looks like I'm rocking spacers, which I am not. Maybe it was just the lighting/angle. I also used a wide angle lens on my iPhone. Not sure how it compares to others with similar lift height as I have not seen another lifted 5th gen in person...yet

Must of been the wide angle effect because this one looks more proportioned. Nice rig b

 

[Duke562]

2011 sr5 bilstein @2.5 w/ spc uca trim plate spacer rear bilstein with Toytec super flex2.0 and spacer
Spider trax wheel spacer
20% tint all around

 

[GzTEP]

Any rubbing issues?

Yes. With the methods I was rubbing the front mudflaps. I'm also rubbing the driver side front liner and a tad on the bumper at lock

 

[LandCruiser]

 

[ttlpakg]

There's a lots of 6" lifts 4R's around here, but yours doesn't looks like it's lifted 6".

Yeah, most of the 4Rs on the island are running a more aggressive wheel/tire setup - deep dish rims with 33s. I'm running 35s so it appears to take some of the lift away.

My wife and I are from the islands also. When we were back visiting a few months ago, we got hooked by the 4Rs with 6" lifts over there.

In SoCal, 5th gen 4Rs with 6" lifts are not common.

 

[blue4run]

What set up did you put on it? what springs and tire size? Looks amazing man very nice!

 

[DeepSea]

I like the 10-13' Trail because of the black accents. Feel like the 14-16' is too much of one color.

 

[jetblack3s]

Kings coilovers 3'" front, icon 3" coils with King shock and 285/70/17