Refill AC on a 97 V6 Limited 4runner

craftytony

New member
Hey guys, I was hoping someone could tell me how and where I need to refill the AC on my 4runner.
I believe I found where to hook the refill can up to. (Upper Left side, looking from the front of the truck)
Just wanted to make sure I am hooking up to the correct valve and anything else I need to know.
thanks!

(Just got my 4runner 2 days ago)
 
Register to hide this ad
Yep. That's it. It should have a "L" on the cap for low.
Be sure to have your AC running on full blast when you refill it. This creates the vacuum that sucks in the new refrigerant/lube.
 
I just did my '99. The '99 FSM gives a spec of 35psi on the low side (after you do the metric conversions). That's what I did--first charge since new in 1999, and it is new truck strong. 35psi was only to the very bottom of the green zone on my Wal-Mart refill can, which recommended a higher pressure.

So I suggest you go only to 35psi and see how it does. You can always add more.
 
I'm also looking into re-charging the AC on my '97 4Runner. With so many AC re-charge products which one should I go with? And do I need one or two cans?
 
I'm also looking into re-charging the AC on my '97 4Runner. With so many AC re-charge products which one should I go with? And do I need one or two cans?

I used this. It worked great on my 2002.
Amazon.com: EZ CHILL R134A - 18 OZ. WITH GAUGE: Automotive
I only needed one can. (Actually 2/3 of a can) But your results may vary. Some are sold with a reusable gauge and hose. So, if you need more than one can, you can just buy the cheaper can that is sold without the hose and gauge.:thumb3:
 
I used this. It worked great on my 2002.
Amazon.com: EZ CHILL R134A - 18 OZ. WITH GAUGE: Automotive
I only needed one can. (Actually 2/3 of a can) But your results may vary. Some are sold with a reusable gauge and hose. So, if you need more than one can, you can just buy the cheaper can that is sold without the hose and gauge.:thumb3:

That's exactly the one I bought at Wal-Mart. Total system capacity is 22.92oz.±1.75oz. so 18oz. is good for anything short of a totally empty system--in which case you need to fix the leak, evacuate it and change the receiver/dryer. I only used maybe a third to a half on mine, but it was still working, just not very well. Now it's great.
 

Members online

Forum statistics

Threads
278,312
Messages
3,554,087
Members
248,016
Latest member
Advally Service

Trending content

Back
Top