Relocating LTD Transfer case Switch

doesn't one of the 4th gens have a switch that has 3 modes or something like that?

I had a 4th Gen but can't for the life of me remember. Note to kids - don't get old!

I've asked a few times in the 4th Gen section but they were not very helpful. I've also asked the dealer to see if they had any experts in the shop who might help......can you guess how that turned out? :ybrick:
 
Mods aside, I am a big fan of things looking factory installed so I'm thinking of moving the switch to the left of the steering wheel - down where that orphan switch blank is (if you know where I mean). Looking behind the bottom trim panel there if I go much more to the right I would not have clearance behind due to a piece of metal bracing. Otherwise does not look like its that big of a deal moving it.....famous last words ;)

Post what you were thinking in regards to a factory rocker switch - sounds interesting.

I am not sure if you are still considering putting the switch to the left of the steering wheel, but bear in mind that I put my ARB compressor switch down there, and my knee hits that puppy all of the time when I get into the vehicle. I figure when it breaks, I will move it...haha...Just a consideration on placement.
 
I had a 4th Gen but can't for the life of me remember. Note to kids - don't get old!

I've asked a few times in the 4th Gen section but they were not very helpful. I've also asked the dealer to see if they had any experts in the shop who might help......can you guess how that turned out? :ybrick:
The V6 had multi-mode 2H 4H 4L on the knob and the center diff lock was a button on the left side of dash. The V8 had full time AWD 4H 4L on the selector and the center diff lock button on the left side of the dash. There are some good shots of both dash layouts on 4th gens on Ebay.
 
I am not sure if you are still considering putting the switch to the left of the steering wheel, but bear in mind that I put my ARB compressor switch down there, and my knee hits that puppy all of the time when I get into the vehicle. I figure when it breaks, I will move it...haha...Just a consideration on placement.

I remember you saying so a while ago. I now have my compressor and locker switches there so that place is out. But I have not banged them with any body parts.......3....2....1..... That's what she said!
 
The V6 had multi-mode 2H 4H 4L on the knob and the center diff lock was a button on the left side of dash. The V8 had full time AWD 4H 4L on the selector and the center diff lock button on the left side of the dash. There are some good shots of both dash layouts on 4th gens on Ebay.

Yeah, I had a 2006 V8 Limited and sort of remember the dail. Could you post the links of what you found on ebay?
 
2007 4x4 V6 SR5

3776722_c3d1bdde-cceb-48c2-a29c-75a25d37f142.jpg~original


3776722_9e66d5b9-6df5-45dd-8b61-65550eb2f33c.jpg~original


2008 4x4 V8 LTD

fw_800.jpg~original


2g_800.jpg~original
 
they get a lot more than that.
Philly, there are 2 versions of the tc switch in the prado - download the toyota jamaica brochure and flip through it to see them. One doesn't have the air suspension/leveling

The Toyota Australia site shows them all very well too. But don't look around there too much as it will probably only make you want to move to Australia. Avoid the Land Cruiser 70 page completely.

Toyota Prado homepage
 
Last edited:

Members online

Forum statistics

Threads
278,307
Messages
3,554,050
Members
248,016
Latest member
Advally Service

Trending content

Back
Top