revised diagram

[Iron Clad Lou]

new switch on dash

 

[Iron Clad Lou]

nicely installed relay...looks about as "factory" as it gets!

 

[A10GAC]

Does anyone have the part number for the 04 Tacoma Fog switch handy?

 

[MW 4Runner]

Does anyone have the part number for the 04 Tacoma Fog switch handy?

Yeah I just ordered one last night...

84160-04010 - Taco switch ($33.56)
90980-11090 - is the harness that clips to the switch that will hold the wire plugs ($2.47)
82998-12340 - wire plugs ($3.77/ea) 4 Req'd

Got it from 1sttoyotaparts.com... cheaper than Partznet.

 

[Falls]

33.00 for a switch ? holy crap . They are nice & stock looking though.

 

[MW 4Runner]

33.00 for a switch ? holy crap . They are nice & stock looking though.

My dealer quoted me $52 just for the switch alone... $33 is high but it sure looks good.

 

[A10GAC]

Thanks for the info, $33 is a bit pricey for a switch but it's worth it for a completely clean install.

 

[Jtwo]

Ok, I must be clueless.......

I've got my 500's wired exactly as in the third diagram but they still don't work.

I used my volt meter on the leads on the light itself and didn't get anything but when I test one lead to ground I get 12v. I tested the grounds from the relay and the lights and get 12v there as well but nothing to the lights.

I'm not completing the circuit somewhere but I can't figure it out.....plus it started raining and got dark. So in the morning I'll be digging into it again........

-J

 

[Desert Cowboy]

Just finished doing this mod for my Hella 9000's. The diagram worked perfectly, and the install is clean! Thanks for the diagram!