Slow's "W4R RIG" AKA "ObeseLander" Build

Slow · 2016-05-11T02:17:34+00:00

W4R RIG AKA "ObeseLander" Build Thought I would start a build thread.Went through over 7 months of BS 2 non KDSS allocation orders rejected then trying to work deals out of state i settled and ordered a KDSS equipped model (I did not want KDSS) at a price that made it palatable to not use it/Gut it. Now the Fun can begin! Obligatory Stock Photo Looking to take this build a step above my FJ. It was a moderate build and it took me everywhere i pointed it and this will be the evolution and some stuff will carry over. The First Wave Of The Build. Ordering/already have queued :Interior Lighting...led's (Done) :Exterior lighting led's and XD Xtreme Hid (Done) :KDSS Gut or at the very least disable the rear :ET King 2.5 CO's and custom length rear kings :TC UCA's :MetalTech LT Springs,Links,bumps and extended lines :Wheelers super bumps up front :BudBuilt full skids and beefy bumpout sliders :4x4 labs rear bumper :Tuck exhaust :Konig Countersteer type x :255/80r17 Cooper ST Maxx (until i can hopefully get 34x10.5 BFG KM3's sometime in 2017 and re gear) :Safari Snorkel (when available if ever) :Odyssey Extreme 2150 :Blue sea or bussmann PD (leaning towards Buss.Ran blue sea in my FJ but want something cleaner) : Diff/locker Breathers :Roof rack delete :Rigid D2 D Fogs :Mount my Power Tank but might go with a compressor space is a concern... :Remove left rear seat cushion ;) : Ham= Either Keep my Kenwood V71 or go back to Yaesu. Want to drill for an NMO on the roof and run a Larsen but roof rack indecisiveness may prevent that for now. :Speakers and amp (Ran focals in the FJ will probably do the same here) Mods I hope to have done by the end of the year Spindle Gussets Goose Gear Drawers Engel MT45 Fridge Roof rack (really undecided here) and a baroud (wishful) Long term :Front Bumper and winch :Front locker and re gear Looking Forward To the Build And getting back out. Thanks For Stopping Buy! :reddance: My Old FJ

Thread starter Slow
Start date May 11, 2016

Slow

New member

May 16, 2016

SOcalTRAIL said:
I removed my KDSS years ago and will never put it back on. I removed the front and rear Pistons and sourced the compression fitting caps to seal the lines.

Would you mind sharing p/n and source for the compression fittings?