Suspension "Clunk" - Sway Bar End Links Bad?

trevo_man · 2016-10-06T00:59:49+00:00

I've got a front end "clunk" going over small road deviations, speed bumps, driveways, etc. I just replaced the front struts, LBJs, and Sway Bar End Link Bushings. Trying to look for things that could be causing the noise and just noticed that the driver side Sway Bar End Link looks a little off. It appears to be rotated toward the front of the vehicle. Does this look normal or is this likely what is causing my noise? Driver Side: Passenger Side (For Reference): What else should I look for? Inner/Outer Tie Rods look to be in good shape.

Thread starter trevo_man
Start date Oct 6, 2016

DK327

Member

Feb 23, 2017

I'm also interested to see if OP resolved this issue... I've so far replaced front/rear sway bar bushings and end links, ITR, OTR, both front CV axles, new coil springs/shocks in back and strut assembly in the front, new OEM upper and lower ball joints... Damn clunk is still there and it's also on passenger side; like it was suggested I have NOT addressed the steering rack bushings or control arm bushings yet, waiting till it gets a bit warmer out.