T-man's '05 Sport Build Thread

Is it possible to reinstall the inner fender liners with this bumper trim mod? Or do you have to custom make some if they are wanted ?
Actually mine are still in. I pulled them up and used zip ties to secure them. I did trim a little off of the front, bottom edge but you wouldn't have to if you don't want to.
 
Actually mine are still in. I pulled them up and used zip ties to secure them. I did trim a little off of the front, bottom edge but you wouldn't have to if you don't want to.

I have a feeling I'll be following your lead in the spring.
 
I was looking into the federals a while ago
Had good reviews
Mtrs suck in rain so,looks like i will have a shitty winter
I personally will be going back to treadwrights w/kedgegrip
Lived them
 
I was looking into the federals a while ago
Had good reviews
Mtrs suck in rain so,looks like i will have a shitty winter
I personally will be going back to treadwrights w/kedgegrip
Lived them
I was going to use them but they upped the price for 35's to where it's only 20 more for one of the tires I have listed above. Seems pointless to get them now.
 
Just bought 4 Hankook Dynapro MT's, 315/70/17, and will be here by thursday. I can't wait cause my tires now SUCK in the snow!!! Not to mention finally getting MT's on my truck and 35's to boot! :girl: whoot whoot
 
Oops!

First stuck ever in Gertrude!

IMAG0214.jpg

IMAG0215.jpg
 

Attachments

  • IMAG0214.jpg
    IMAG0214.jpg
    147.3 KB · Views: 850
  • IMAG0215.jpg
    IMAG0215.jpg
    143.1 KB · Views: 848
quite the dig in you got goin on, looks like a fun trip though in the snow!
Ya was all good til the passenger side front fell in the ruts, then the skid plate landed on the sand. Was all over at that point. Tires were free spinning. Lol only took a bump and I was off.
 
I'm interested to see how you're gonna fit 35's. I'd love to one day but I don't want to run any body lift or a small one.
 
I'm interested to see how you're gonna fit 35's. I'd love to one day but I don't want to run any body lift or a small one.

I have 2.5" body lift and bilstein lift set on highest level. Shouldn't be an issue, and I've already chopped my body mount and trimmed inside fender wells pretty good. Possibly need more trimming, won't know until it is mounted up. I also have wheel spacers that push tires out about 1.5-1.75 inches.
 
Stupid drivers side rear caliper froze up.. So in the spring I will be replacing the one lonely old one on the rear passenger side just to make sure it doesn't happen again. I'm sick of brakes! Ugh. My mom's fj, my sisters mustang, my camry, and my sisters jeep patriot, not to mention the issues with my calipers going out one by one. Sheesh. Wish I would've had the money to just replace all 4 at once and be done with it. Ruined brand new rotors on the rear from this.
 
She looks funny as hell with the stock tires on! The Hankooks sure are a HELLUVA lot better than those BF Goodrich ever thought of being! Get the MT's tomorrow!
 

Attachments

  • IMAG0219.jpg
    IMAG0219.jpg
    134.9 KB · Views: 774
Here we go!! New shoes for Gertrude all mounted up!! Ride really nice, can barely hear them on the road, and damn aggressive!!!

2014-11-21 16.54.43.jpg

2014-11-21 16.55.15.jpg

2014-11-21 16.55.30.jpg

2014-11-21 16.55.59.jpg

2014-11-21 16.54.56.jpg

2014-11-21 14.09.54.jpg

Height difference between 265/65/17 stockers and new 315/70/17 BEASTS!

2014-11-21 14.54.47.jpg
 

Attachments

  • 2014-11-21 16.54.43.jpg
    2014-11-21 16.54.43.jpg
    137.5 KB · Views: 985
  • 2014-11-21 16.55.15.jpg
    2014-11-21 16.55.15.jpg
    135.9 KB · Views: 981
  • 2014-11-21 16.55.30.jpg
    2014-11-21 16.55.30.jpg
    134 KB · Views: 988
  • 2014-11-21 16.55.59.jpg
    2014-11-21 16.55.59.jpg
    134.8 KB · Views: 976
  • 2014-11-21 16.54.56.jpg
    2014-11-21 16.54.56.jpg
    132.8 KB · Views: 1,017
  • 2014-11-21 14.09.54.jpg
    2014-11-21 14.09.54.jpg
    138.9 KB · Views: 1,000
  • 2014-11-21 14.54.47.jpg
    2014-11-21 14.54.47.jpg
    135 KB · Views: 958
Can you confirm no rubbing at all whatsoever at full lock and or compression forward and backwards? looks just sick!
 
Can you confirm no rubbing at all whatsoever at full lock and or compression forward and backwards? looks just sick!

I had to remove the rest of the mud flap I still had on the rear and I had to trim the behind the front tires above the body mount where the pinch weld is. I expect I will have to hammer the pinch weld flat as others have done, but not an issue IMO. As for rubbing on anything else, with my spacers I clear the UCA with room to spare, don't come close to frame or anything else. I will get a chance to flex it a little over the weekend, then I have some friends visiting next week and we plan on going out and bombing around on quads and our trucks. I'll keep reporting back with any issues that arise, but seems to be decent so far with the minor trimming.
And that V8 don't care one bit about those big tires either! These weigh 71lbs where the stock size weighed 38lbs. About the only thing I notice, which I had with the 33's too, is that it takes more for it to kick into overdrive. It doesn't go crazy downshifting, just takes longer to kick into the final overdrive.
 

Members online

No members online now.

Forum statistics

Threads
278,316
Messages
3,554,112
Members
248,016
Latest member
Advally Service

Trending content

Back
Top