TCMach's Build Thread

[revenantdead]

Really! I just did a 1" BL and polyurethane body mounts. I'm planning on running tundra 5100's in front with toytec 10mm strut toppers and yy/yb trd coils. With 8 wraps out back with a trim packer for driver lean and helper bags in the coils. All that was to fit 35's...

 

[snivilous]

Really! I just did a 1" BL and polyurethane body mounts. I'm planning on running tundra 5100's in front with toytec 10mm strut toppers and yy/yb trd coils. With 8 wraps out back with a trim packer for driver lean and helper bags in the coils. All that was to fit 35's...

Just remember suspension lift only clears tires at the mall. That's why TC cut up the firewall so much and can run very little/no lift and still clear totally fine. Flex doesn't care how much lift you have

 

[Black798]

Really! I just did a 1" BL and polyurethane body mounts. I'm planning on running tundra 5100's in front with toytec 10mm strut toppers and yy/yb trd coils. With 8 wraps out back with a trim packer for driver lean and helper bags in the coils. All that was to fit 35's...

If you're looking to clear 35s with a 1 inch body lift this is what it takes.... I have roughly 1/2" of clearance everywhere after this

 

[revenantdead]

​

If you're looking to clear 35s with a 1 inch body lift this is what it takes.... I have roughly 1/2" of clearance everywhere after this

holy shit nice frame notch!

 

[hamsandwiches]

Interested to see how the 3.4 handles turbo boost as opposed to that from a SC

 

[TCMach]

Just remember suspension lift only clears tires at the mall. That's why TC cut up the firewall so much and can run very little/no lift and still clear totally fine. Flex doesn't care how much lift you have

Big Facts

If you're looking to clear 35s with a 1 inch body lift this is what it takes.... I have roughly 1/2" of clearance everywhere after this

And just keep going until you cut the majority of your body mount out to do 37s. Easy peasy. I need to notch my frame real bad... although on the upside it will never rust in that spot, always freshly polished

Interested to see how the 3.4 handles turbo boost as opposed to that from a SC

I sold that kit a long time ago, doubled my money on it so it was a good sell but kinda disappointing to not run it. Lots of turbo builds on the forum, 3.4 is fine with it. I'm sure I'm missing some but here is a good starter
Clownmeat's Turbo Build
Turbo Rock Lobster
Glade's 96 Turbo

 

[RoyT4R]

Updates?

Been no posts for almost 2 years.. isnt it about time you make another update? :ybrick:
On a serious note absolutely love your build!

 

[Fishwerks]

Been no posts for almost 2 years.. isnt it about time you make another update? :ybrick:
On a serious note absolutely love your build!

[MENTION=82211]TCMach[/MENTION] is a bum so I'll update for him. He put it on 35s because he was daily driving it for a bit. Has a rear bumper from [MENTION=28464]eimkeith[/MENTION] now. I think that's it...

 

[TCMach]

Been no posts for almost 2 years.. isnt it about time you make another update? :ybrick:
On a serious note absolutely love your build!

Honestly not much has been going on. New bumper went on, thought I posted that. Other than that I bought a house in 2020 and have just been working on that. This truck will be for sale here in a month or so. Going to end up doing a mild build on the wife's 5th gen.

Untitled by Tyler Carvell, on Flickr

Untitled by Tyler Carvell, on Flickr

[MENTION=82211]TCMach[/MENTION] is a bum so I'll update for him. He put it on 35s because he was daily driving it for a bit. Has a rear bumper from [MENTION=28464]eimkeith[/MENTION] now. I think that's it...

Whatchu done to your truck recently besides flop it? I'll wait.......