Tire Rub, Stock size and stock rim

[screeves]

I'm getting tire rub on the liner at full lock in reverse. I have the stock rims and stock size Terra Grapplers, I just had Bilstein 5100s put on the front, set to 1.75. Should I just move the liner up or does that mean I have an alignment issue? An alignment was done after instal.

2011 SR5

 

[Jeremy556]

Move the liner up. If anything, your alignment is better than most with more caster, causing the rub at the front.

When I was running stock suspenders and stock size Duratracs, with the caster set near 4 degrees, I had to move the liners to prevent rubbing.

 

[eddiebx]

Move the liner up. If anything, your alignment is better than most with more caster, causing the rub at the front.

When I was running stock suspenders and stock size Duratracs, with the caster set near 4 degrees, I had to move the liners to prevent rubbing.

Sorry couldn't help it, lol.