Hey! you used to live at the Manhattan. I used to see you all the time and be so jealous of your truck! You've done a lot to it since I last saw it in person. Looks awesome!
There aren't any dust boots on the ball joints? Do they squeak after awhile and require constant maintenance. I've had heim joints on other vehicles and once they started squeaking/creaking it seemed impossible to get them to stop no matter how much they where cleaned and lubricated.
Hey gang I have a quick question:
For those peeps in Colorado, me and a couple buddies are planning a trip out west in mid May and are wondering if we do Moab (again) or just southern Colo.
What would be the experience that time of year and what places can we go have fun, Camp, potentially fish and hit a couple trails? somewhere REMOTE.
We are wondering if we want to hit Moab again so soon.
Any help, hints, advise would be appreciated (we did blackbear back in Nov).
Thanks.
Hey gang I have a quick question:
For those peeps in Colorado, me and a couple buddies are planning a trip out west in mid May and are wondering if we do Moab (again) or just southern Colo.
What would be the experience that time of year and what places can we go have fun, Camp, potentially fish and hit a couple trails? somewhere REMOTE.
We are wondering if we want to hit Moab again so soon.
Any help, hints, advise would be appreciated (we did blackbear back in Nov).
Thanks.
Hello, unfortunately a lot of areas will still have quite a bit of snow here in May. Not to say it cant be done...but some trails might still be closed or difficult to pass. Great build by the way!
Nice looking rig! Surprised I haven't seen it out playing in traffic. [emoji1]
I'm curious, where did you end up mounting the Wired Wagon fuse/ relay box?
hey bud do you happen to remember where you wired the red/yellow wire it says to ignition and the blue/white to dash illumination. i know this is an older thread but i'm trying to install the same compressor as yours but i have a 1 gallon tank with it. thanksSo finally bit the bullet and went for on-board air.
Went for the ARB Twin Compressor
Luke at 4x4Labs is now selling the compressor mount brackets, I think has some in stock already powder coated and all, direct drop in, no moving or modifying anything, all bolts and nuts included, mounting the compressor took 15 minutes, wiring on the other hand a different story) .... I did not go for the manifold as I have no plans to run lockers.
Simple yet impressive work from 4x4Labs.
<img src="https://farm6.staticflickr.com/5741/21906591281_a1668e3725_b.jpg" width="1024" height="768" alt="IMG_3708"></a>
<img src="https://farm1.staticflickr.com/747/21274169434_bf9009e154_b.jpg" width="1024" height="768" alt="IMG_3707"></a>
This thing is very impressive and fast filling up.
Additional parts were:
All from Amazon
AirPro PUR-14X50-B 1/4-Inch x 50 Foot Polyurethane 250 PSI Air Hose
Legacy A73457D Color Connex Type D 7 Piece 1/4 in. Red Coupler and Plug Kit
Amflo 150 12" Straight-on Tapered Chuck Inflator Gauge - 10 to 90 PSI
...
hey bud do you happen to remember where you wired the red/yellow wire it says to ignition and the blue/white to dash illumination. i know this is an older thread but i'm trying to install the same compressor as yours but i have a 1 gallon tank with it. thanks
Great shots! Im hoping to tackle Black Bear this summer. How difficult were the switchbacks?