TRD Pro parts

[JoeG]

searching via phone.... Anyone have the part# for the black roof rail caps?

63491-35030
63492-35030
63493-35030
63494-35030

 

[Saker]

I will be doing that in the interim but plasti dip fades

Please post back when you get them installed for fit and finish !
Thx in advance!

 

[4Surfin]

Please post back when you get them installed for fit and finish !
Thx in advance!

Looking for a used set. Toyota want $30+ each! Not spending $120 on plastic caps

 

[Saker]

Here is the pdf instructions for the rack assy....

It has the part #'s for the rear only as well....I knew I had them somewhere!

 

[Haydenatx]

Got these babies in today..... Can't wait for Saturday.

 

[Mistaken]

^^^ TRD boxes!!!!!!

 

[Hook 'Em Horns!]

Posting for comparison...

Hard to tell any difference in the plate other than cutout.
Looks like the bolts are in the same place.
Looks like they used different sized/style lettering for the "TRD" logo. Look at the "R" on both pics.

Maybe they used SR5 non KDSS Radiator Support Brackets.... oh, should be able to purchase those from TOYOTA.

Thanks for using my image too!

Sup Saker! I need the trim piece for the top of TRDP front skid, where the heck did you find that?

Thanks in advance!

 

[Saker]

Sup Saker! I need the trim piece for the top of TRDP front skid, where the heck did you find that?

Thanks in advance!

[MENTION=119618]Hook Em' Horns![/MENTION],

Hey man, that came OEM on my SR5.
Just look it up or have dealer look it up for my description in my Sig!
Then just trim it to fit so it won't have to be removed when you need to drop the skid, follow my write up on size/style bolts to use!

Hope this helps

. : : EDITED : : .
Here is the final product.....

 

[Hook 'Em Horns!]

[MENTION=119618]Hook Em' Horns![/MENTION],

Hey man, that came OEM on my SR5.
Just look it up or have dealer look it up for my description in my Sig!
Then just trim it to fit so it won't have to be removed when you need to drop the skid, follow my write up on size/style bolts to use!

Hope this helps

. : : EDITED : : .
Here is the final product.....

Thanks again, bud! I already have so much to do, so adding this to 'the list' right behind rear diff breather.. Hah

 

[Cheers!]

I wonder if you can just use the rci filler plate

10+ Toyota 4Runner Filler Plate - Stock Bumper

 

[Saker]

I wonder if you can just use the rci filler plate

10+ Toyota 4Runner Filler Plate - Stock Bumper

Looking at the photos of the RCI filler plate, it looks like the TRD plate comes further towards the front therefore interfering with the RCI plate.

Look at it and correct me if I overlooked something there.

 

[Saker]

[MENTION=119618]Hook Em' Horns![/MENTION],


I think this is the OEM part # 5212935030

 

[Hook 'Em Horns!]

[MENTION=119618]Hook Em' Horns![/MENTION],


I think this is the OEM part # 5212935030

Thanks, Saker! So just that and the new bolts mentioned earlier?

 

[Hook 'Em Horns!]

[MENTION=119618]Hook Em' Horns![/MENTION],

Hey man, that came OEM on my SR5.
Just look it up or have dealer look it up for my description in my Sig!
Then just trim it to fit so it won't have to be removed when you need to drop the skid, follow my write up on size/style bolts to use!

Hope this helps

. : : EDITED : : .
Here is the final product.....

Wait, so mine likely had one until they installed the TRD skid pre-sale? If so, then they gank'd my part, no?..

 

[Saker]

Wait, so mine likely had one until they installed the TRD skid pre-sale? If so, then they gank'd my part, no?..

Yes! :flame::infidel::sorry:

:llama: . . . . . . . . . . . :sniper:

 

[Saker]

Thanks, Saker! So just that and the new bolts mentioned earlier?

Yep, M6 X 1.0 with flat washers like in the photo.
Buy some fender washers that the bolt is just oversized, drill the washer out so the bolt fits, you will have to fit test the filler piece to your liking, but once it is finished and up, it will not have to be removed when removing and replacing the skid plate for oils changes etc...

I cut the least amount as possible to get as much coverage as possible, but enough so it caused no interference...if I made myself clear....

 

[Hook 'Em Horns!]

Yes! :flame::infidel::sorry:

:llama: . . . . . . . . . . . :sniper:

Ah nah, hell nah!!

1) Called my local Toyota dealer's parts dept. and confirmed they do come stock on SR5s.

2) Asked to be transferred to the Sales Manager...

3) Explained situation...

Him: "Whatcha want me to do, buy this part for you, or what?"

Me: "Yep."

Him: "Come on down and I'll write you up a ticket to take over to the parts dept."

:girl:

 

[Saker]

Sounds like you handled it with style and a good outcome!

 

[Hook 'Em Horns!]

Sounds like you handled it with style and a good outcome!

Went and picked it up today along with the needed 4 screws and 1 fastener :cowboy:

 

[Hook 'Em Horns!]

TRD Rear Handle Panel + Blackout Kit

Swapped the rear hatch handle panel out for the TRD/TE panel (black), and then applied the blackout kit.

Next up, rear bumper garnish...