What did you do to/in your 5th Gen today?!

Um, no, it does not. PD has a texture, looks repainted, attracts dust/dirt/rag fuzz, and does not hold up well over time and pressure washing. I know.... and I wouldn't do it again.




This. [MENTION=144979]ToyoDriver[/MENTION] 's solution is far nicer.

Um, yes, it does to me. But technically I used the Rustoleum version which has a flat texture and it looks the same. I hear ya on the PD texture though as I've seen my friends wheels and noticed that. I don't have dust/dirt attracting problems with the Rustoleum and it has held up very well for me.

I'm sure the covers look slightly better. But I wouldn't go as far as to say "far nicer".

Just my opinion.
 
Last edited:
Had to drive south for a bit-ness meeting today. Took the scenic route. Stopped in at a junkyard. Also stopped off in Lynchburg for a few commemorative bottles of Jack. 150 years of anything is legendary...

ee7595ed9514f272e34404c4ef2ad57f.jpg


585802897c4de603ad484fd00d910be7.jpg


c42b7a66f58eca65b739f535c56ef50f.jpg



Sent from my iPhone using Tapatalk
 
Finished the HAM install.

Ran the antenna to under the driver's seat along with power from the battery. Then installed a faceplate separation kit so I can mount the faceplate in the sunglass holder. Then ran a mic extension from the faceplate back down to along driver's right leg on the center console to hang the mic.

3EF24602-F534-499C-8918-CD7A1DF51742_zpsslrdpz0k.jpg~original


IMG_1057_zpsowvkbyyf.jpg~original


BF7ABF8A-BBB7-40F0-ABF6-787E856B6950_zpszbpogyve.jpg~original


B7CEB948-B881-4A0B-BEE3-5DAAC3824D28_zpsdd5uukd5.jpg~original


8A3FBB36-B773-405B-9040-FDA4D4564C5B_zpsrmophyps.jpg~original


ECFDC9EC-FE91-407F-9FC2-7DD17D14B1CB_zpsg32ekrvi.jpg~original


53EB1E5A-12F1-4EBD-949B-3DB400A0BCC9_zpsjb2akpfq.jpg~original
 
Left Salem for an Arizona Thanksgiving. The first day looked like this; Second day a little different.
 

Attachments

  • IMG_1179.jpg
    IMG_1179.jpg
    75.4 KB · Views: 753
  • IMG_20161121_130250.jpg
    IMG_20161121_130250.jpg
    55.2 KB · Views: 746
Last week I had windshield replaced with OEM glass. Now it has 1 inch hole in it. It got smashed by the road rock this morning. Don't you just hate it?

One week later got hit by another brick :ybrick:

Now my windshield has two holes.... and counting...
That is four rocks in three weeks.
 
One week later got hit by another brick :ybrick:

Now my windshield has two holes.... and counting...
That is four rocks in three weeks.
I got my last cracked windshield driving through Sac on the the 5. What the hell
are they doing in that town?
 
Took a drive over the river and through the woods ahead of the masses to the mountain retreat. Down on the TN/NC line for the holiday. Will get some wheeling and lots of shooting in before I leave.
0d8ad6fca02179d3b3b194ec582b03ab.jpg


Sent from my SM-G930V using Tapatalk
 
Last edited:
Detailed my buddies massive Icon equipped LE on 35's. I did an exterior decontamination/claybar & then a coat of AMMO skin defense & some light spray wax on top. Such a sick truck. Much rub, much big, me like.
b9f1ff1b15e9019471a00e1e61c9751a.jpg
d7d3ef958874badef52d75c92ba8aeaf.jpg
0a2eda790c81e694b3ce66c091827742.jpg
57936677f74e25bbbfb7f96b56a4c9ab.jpg
50e9a2b3decf46cbfaed380c36047723.jpg
e28a44f44e516705c28664ca72b9ae24.jpg
7075380a4d3a7ba3332919a52aac368a.jpg
ed0794cf5ac691db0a42d36bf9fa6f8d.jpg

Surface contaminants are SILENT KILLERS. REMOVE THEM ALL!!!
f2afa4022e325337a746a709b2172cb1.jpg



Sent from my iPhone using Tapatalk

Trade out for a nice detail like that?! Or show me
 
Coming from a guy who has yet to get a good SWR reading on his CB (you may not want to listen to me)....

....have you considered flipping that mount over so that the base sits a little lower and installing one of those fold down mounts?

https://www.amazon.com/Radio-Fold-Over-Antenna-Adapter-BaseTthread/dp/B001JT74EG

That way you could get a longer antenna and not have it erect all the time.

(I'll also be interested to know how good of an SWR reading you get and where you ground.)

Thanks CowboyTaco... interesting idea and product. I've kinda committed to the route I'm going and should have it all fished up tomorrow. Those pictures were from a mockup to help me figure stuff out. I've improved the overall approach and think I have an elegant solution for the ground. Guess I'll find out once I hook up the SWR meter. Will post how it all works out.
 
Drove down from the Central Coast to OC for Thanksgiving... such an easy albeit long drive. Very comfortable even through the Grapevine (I-5). Love this thing
 
stopped to snap some pics after dinner last night of the new OPT7 LED light bar that i installed with my [MENTION=139789]RagoFabrication[/MENTION] brackets! shout out to [MENTION=129328]jasonaaron480[/MENTION] for the sick in depth youtube tutorial! wired everything perfetly the first time in an hour!
will be posting pics/steps and such soon when i start my build thread!
 

Attachments

  • LED.jpg
    LED.jpg
    137.5 KB · Views: 785
what cha getting wrapped bro?!
Wrapped the hood scoop and part of the hood. Had the hood of my FJ Cruiser Plastidiped to reduce the glare, but since 4Runner's hood is more complex, I left it to the pros. So happy with the results!

5dacae3d77047983b3c6eaafbfca3398.jpg

83c7fd41f15c109fa5d58a01342c9567.jpg

5426884b7cb07f25efee9feebdca6189.jpg

024f3faaec09e7cd36bc8e94d005e885.jpg


Sent from my Nexus 6P using Tapatalk
 
Didnt do anything to, or in it today. Bc im in the middle of the gulf of mexico but i did order xenon depot HID kit with philips bulbs and their yellow philips LED fog lights. cant wait to get home and install them.
 

Members online

Forum statistics

Threads
278,317
Messages
3,554,129
Members
248,016
Latest member
Advally Service

Trending content

Back
Top