What did you do to/in your 5th Gen today?!

Also late but took her out to Hidden Falls Adventure Park in Marble Falls,TX last weekend to stretch her legs and see how she performed. In all the playing off road I've done in the last few years, this is my first time in the drivers seat, I'm usually the spotter... A good time was had by all!

Climbing up the hill just before sunset...
IMG_7541.jpg

Celebratory beer...
IMG_7555.jpg

Chasin' Waterfalls...
IMG_7557.jpg

Stretching her Legs...
IMG_7561.jpg

IMG_7562.jpg

IMG_7556.jpg

IMG_7523.jpg
 

Attachments

  • IMG_7541.jpg
    IMG_7541.jpg
    153.9 KB · Views: 1,274
  • IMG_7555.jpg
    IMG_7555.jpg
    123.1 KB · Views: 1,240
  • IMG_7557.jpg
    IMG_7557.jpg
    135.7 KB · Views: 1,212
  • IMG_7561.jpg
    IMG_7561.jpg
    129.9 KB · Views: 1,207
  • IMG_7562.jpg
    IMG_7562.jpg
    114.7 KB · Views: 1,291
  • IMG_7556.jpg
    IMG_7556.jpg
    136.2 KB · Views: 1,208
  • IMG_7523.jpg
    IMG_7523.jpg
    135.5 KB · Views: 1,204
HTXpro said:
WTF?!?! I want a drivers side grab handle! Stupid 2016s!
Click to expand...

yes grab handle! Sorry for the 2017 annotation confusion but no 5th GEN comes with an A-pillar grab handle:

I Purchased a passenger side grab handle and the the two covers over the bolt mounting holes.

I fabricated a custom bracket for the BOTTOM hole as the top hole i used the existing bolt hole that is hiding under the "SRS CURTAIN AIRBAG" pop out. the top hole has a bracket that is the same build quality as the passenger side brackets - as if toyota may have intended to install a grab handle but decided not to. the space is there for mounting a custom bracket for the bottom hole. no issue with space at all.

Top bolt:
1. I had to install a metal spacer because a gap is formed between the handle and the top bolt mount surface hiding under the "SRS CURTAIN AIRBAG" pop out plug.

2. longer bolt of course M6x1.0x35mm

Bottom Bolt:
1. 5/16 - 18 x 2 inch long bolt with washer.

2. custom bracket mounted to the A pillar structure.

3. drilled hole and modifed the A piller trim interior plastic "CLIP" that helps hold the A pillar trim in.

Finished:
outcome is awesome! very oem clean install - exactly what everyone seems to complain about online and all these "top 5 things i hate about my 4runner youtube videos"

Ill post more pics and a stand alone thread later. as the bracket i designed is very basic and works just fine for an unseen bracket.

-J
 

Attachments

  • tapatalk_1491354272025[1].jpeg
    tapatalk_1491354272025[1].jpeg
    33.7 KB · Views: 1,998
  • tapatalk_1491354264406[1].jpeg
    tapatalk_1491354264406[1].jpeg
    28.3 KB · Views: 1,698
  • tada.jpg
    tada.jpg
    51.1 KB · Views: 1,697
  • Extra hole.jpg
    Extra hole.jpg
    65.4 KB · Views: 1,708
  • Mounted.jpg
    Mounted.jpg
    66.1 KB · Views: 2,024
Last edited:
Hidden Falls Continued...

IMG_7526.jpg

Right before laying her on the gas tank....
IMG_7533.jpg

Having only 3500 miles on her I decided to *****foot it and take a tug out, thankfully Davie Crockett came to the rescue....
IMG_7560.jpg

IMG_7535.jpg

My Co-Pilot....
IMG_7451.jpg
 

Attachments

  • IMG_7533.jpg
    IMG_7533.jpg
    136.9 KB · Views: 1,632
  • IMG_7560.jpg
    IMG_7560.jpg
    134.2 KB · Views: 1,633
  • IMG_7535.jpg
    IMG_7535.jpg
    131.6 KB · Views: 1,617
  • IMG_7451.jpg
    IMG_7451.jpg
    138.6 KB · Views: 1,633
  • IMG_7526.jpg
    IMG_7526.jpg
    137.2 KB · Views: 1,666
Jasontamu said:
yes grab handle! Sorry for the 2017 annotation confusion but no 5th GEN comes with an A-pillar grab handle:

I Purchased a passenger side grab handle and the the two covers over the bolt mounting holes.

I fabricated a custom bracket for the BOTTOM hole as the top hole i used the existing bolt hole that is hiding under the "SRS CURTAIN AIRBAG" pop out. the top hole has a bracket that is the same build quality as the passenger side brackets - as if toyota may have intended to install a grab handle but decided not to. the space is there for mounting a custom bracket for the bottom hole. no issue with space at all.

Top bolt:
1. I had to install a metal spacer because a gap is formed between the handle and the top bolt mount surface hiding under the "SRS CURTAIN AIRBAG" pop out plug.

2. longer bolt of course M6x1.0x35mm

Bottom Bolt:
1. 5/16 - 18 x 2 inch long bolt with washer.

2. custom bracket mounted to the A pillar structure.

3. drilled hole and modifed the A piller trim interior plastic "CLIP" that helps hold the A pillar trim in.

Finished:
outcome is awesome! very oem clean install - exactly what everyone seems to complain about online and all these "top 5 things i hate about my 4runner youtube videos"

Ill post more pics and a stand alone thread later. as the bracket i designed is very basic and works just fine for an unseen bracket.

-J
Click to expand...


I would love to meet up with you sometime and see how you did this! That is one thing that I miss from my 4th Gen.
 
Would be interested in seeing how this turned out from other angles and in the daylight. But would be down to have you make me one as well.
 
LawnDart said:
Would be interested in seeing how this turned out from other angles and in the daylight. But would be down to have you make me one as well.
Click to expand...

ya sorry i did it last night...this one has flash....ill take more pics, but there is no gap, smooth and nice...looks very oem.

-J
 

Attachments

  • 20170419_215337.jpg
    20170419_215337.jpg
    68.9 KB · Views: 1,504
New replacement factory Lower control arms and toytec front coils with additional small spacer with existing 5100s and added diff drop


Sent from my iPhone using Tapatalk
 
Took my truck on its first road trip since I bought it in January – ice climbing north of Nipigon, Canada (at the northernmost point of Lake Superior). Very mild conditions, no need for 4WD as there was little snow.

(I'll shrink the pics as needed after I see them on a couple of devices; apologies in advance if they are too large.)
 

Attachments

  • farris_20170322-023-2.jpg
    farris_20170322-023-2.jpg
    122.5 KB · Views: 1,700
  • farris_Nipigon_025.jpg
    farris_Nipigon_025.jpg
    135.8 KB · Views: 1,706
  • farris_20170322-008.jpg
    farris_20170322-008.jpg
    119.2 KB · Views: 1,699
  • farris_20170322-032.jpg
    farris_20170322-032.jpg
    142.4 KB · Views: 1,694
98b26c89d1be7dc5a26c01e221b2a693.jpg


bd58739df3edffe1975292e89b8a41a3.jpg


42d45cdee8ca4af95123eef1c7aac486.jpg


2e2404a70254d518ffaa761f8587bcd2.jpg


Got it detailed. It was much needed after a weekend at the beach and 16 hrs driving with a 4 year old in the back.


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.

Similar threads

MNT4R
5th Gen 4runner: will my tires (285’s) rub? Here are some things to consider...
2 3 4
Replies
66
Views
106K
Nick Stevenson
N
T
2006 Toyota 4Runner SE V8, Red, Icon Lift (Seattle)
Replies
6
Views
7K
Trabs00
T
A
Warranty 101: Warranty and You - TD1, recalls, updates, Magnuson Moss, etc...
2
Replies
31
Views
7K
AudiTech
A
rigtec
4Runner alternator upgrade (gen 5)
10 11 12
Replies
234
Views
113K
scfw0x0f
S
harper7
5th Gen Official Complaint Thread to Toyota and Some Solutions
9 10 11
Replies
219
Views
86K
smitty1320
S

Members online

Total: 4,521 (members: 4, guests: 4,517)

Forum statistics

Threads
278,317
Messages
3,554,128
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top