What did you do to/in your 5th Gen today?!

Today it sits in my garage. I just bought it and got it home last night. Will be loading it up in a week for a trip to Colorado. Can't wait.

8da9a83b3f0ad7ffaceb7068fba36b6b.jpg



Sent from my iPhone using Tapatalk
 
Ordered my ARB twin chamber compressor, now I need a mount and will likely go with Hefty Fabworks. Got a killer deal on the compressor too!
 
Discovered that my Baja utility rack with some padding is a great place to sleep under the stars.
Bugs thought so too.

$5 in 3/4x3/4x1/2 PVC tees, a saw and some 1/2 I had laying around combined with an 8'x10' sheet of mosquito netting.

Still cleaning it up and refining, but my daughter likes to sleep in the car, so I can sleep on the roof and transition through the sunroof.

Pvc tees with a 1" hole cut in the side lengthwise clip right onto the roof rack bars. I also hot glued some rope along the perimeter of the netting to weigh it down.

Ghetto camping at its best, and I can throw a tarp over it if need be, or remove the PVC supports and just drape the netting across the car sideways and it will cover the windows so we can sleep inside with fresh air and no bugs.

Setup is a breeze - clip in two poles, toss net over, open sunroof and insert padding and sleeping bag. Bam. Your room is full of stars tonight.
7223a6e3b17a5abe33167eebeb005f02.jpg
acbbf2e444eabe54db818f9c82a08b0b.jpg
 
Discovered that my Baja utility rack with some padding is a great place to sleep under the stars.
Bugs thought so too.

$5 in 3/4x3/4x1/2 PVC tees, a saw and some 1/2 I had laying around combined with an 8'x10' sheet of mosquito netting.

Still cleaning it up and refining, but my daughter likes to sleep in the car, so I can sleep on the roof and transition through the sunroof.

Pvc tees with a 1" hole cut in the side lengthwise clip right onto the roof rack bars. I also hot glued some rope along the perimeter of the netting to weigh it down.

Ghetto camping at its best, and I can throw a tarp over it if need be, or remove the PVC supports and just drape the netting across the car sideways and it will cover the windows so we can sleep inside with fresh air and no bugs.

Setup is a breeze - clip in two poles, toss net over, open sunroof and insert padding and sleeping bag. Bam. Your room is full of stars tonight.
7223a6e3b17a5abe33167eebeb005f02.jpg
acbbf2e444eabe54db818f9c82a08b0b.jpg
Thats slick i might have to steal this idea


Sent from my SM-G955U using Tapatalk
 
I installed a Rotopax storage container (2 gallon) in the cargo area -- on the cargo door. Filled it with essential stuff like jumper cables, gloves, etc... I just ordered some heavier-duty lift struts to help with the added weight.
 

Attachments

  • rotopax3-small.jpg
    rotopax3-small.jpg
    134 KB · Views: 1,038
  • rotopax2 small.jpg
    rotopax2 small.jpg
    54.3 KB · Views: 1,050
Thats slick i might have to steal this idea


Sent from my SM-G955U using Tapatalk
Please do! And make it look better than mine. And post pictures.

I'd get netting that's longer and wider though, so that it drapes all the way down over the windows and they can be rolled down.

Sent from my SM-G930V using Tapatalk
 
Old Highway 40

Found an abandoned, paved section, and then got stopped from going through the tunnels by a gate. I guess I haven't tried the tunnels in a fair number of years.
 

Attachments

  • 4runner_old40.jpg
    4runner_old40.jpg
    141.8 KB · Views: 1,024
  • snowsheds.jpg
    snowsheds.jpg
    141.9 KB · Views: 1,016
I installed a Rotopax storage container (2 gallon) in the cargo area -- on the cargo door. Filled it with essential stuff like jumper cables, gloves, etc... I just ordered some heavier-duty lift struts to help with the added weight.

nice!! How sturdy is it on that panel?
 
nice!! How sturdy is it on that panel?

It's actually not attached to the panel. I installed a metal bracket to the metal part of the cargo door behind the panel. Then I drilled 2 holes in the cargo door panel to allow the bolts to connect to the metal bracket and the rotopax lock-down thing. The whole install process took quite a while. Lots of measuring and re-measuring to get everything lined up correctly.

I can guarantee that if I had simply bolted it to the panel, the whole panel would fall on my head the first time I opened them door. The container weighs about 13 pounds with all the gear in it.
 
Started my dual battery install using the Off-Grid kit. Picked up the powder coated cages and spent a little time getting the aux battery cage installed. Will continue tomorrow and then start working on my front bumper next.
 

Attachments

  • IMG_0497.jpg
    IMG_0497.jpg
    127.7 KB · Views: 933
  • IMG_0498.jpg
    IMG_0498.jpg
    116.8 KB · Views: 896
Got new tires put on today. 275/70R17 BFG KO2. Definitely some rubbing on the front bumper at full lock but should be fine for a couple weeks until my Pelfreybilt bumper comes :)

36246697730_8fc0a1fab6_h.jpg
 
Did a little beach riding on Assateague Island

Couple of things checked off the list...

1.) Swapped out my head unit for a touch-screen aftermarket Pioneer radio. Still need to work on the ASWC-1 harness to retain steering wheel controls, but not worried about that.

2.) Fished a USB cable from the back of the new head unit through the center console.

3.) Swapped out the sh*tty roof rack cross-bar bolts for something easier to twist ($3/each).

4.) Went to Assateague Island and got to use the new Yakima Skyrise for the first time. Made this cool little video of us on the OSV section of the beach.
 

Attachments

  • a.JPG
    a.JPG
    65.5 KB · Views: 831
  • b.JPG
    b.JPG
    53.9 KB · Views: 829
  • c.JPG
    c.JPG
    49.5 KB · Views: 827
  • d.JPG
    d.JPG
    100.7 KB · Views: 835
  • e.JPG
    e.JPG
    118.6 KB · Views: 823
  • f.JPG
    f.JPG
    96.8 KB · Views: 823
Plasti dipped rear badges and Installed recovery hitch.
 

Attachments

  • IMG_20170817_181651.jpg
    IMG_20170817_181651.jpg
    134.1 KB · Views: 701
  • IMG_20170817_181444.jpg
    IMG_20170817_181444.jpg
    135.2 KB · Views: 716
Sorry no pics at the moment but I spent the day washing, clay barring and applying ceramic coat. It was tedious but the paint looks amazing now


Sent from my iPhone using Tapatalk
 
This past Sunday was spent installing an Icon stage III in a friend's driveway.

aY0LnUk.jpg


tTtVttO.jpg


V5zJ6UD.jpg


And yesterday I had the Nitto 285/70/17s and VTX wheels put on.

wAIMnVK.jpg


Qcq62fP.png
 
Used the Runner to drop our son off at college today....

In 4 years () he'll have a degree and the T4R!

c710593bc6e81249ece96c0ba009dca3.jpg



Sent from my iPhone using Tapatalk
 

Members online

Forum statistics

Threads
278,316
Messages
3,554,124
Members
248,016
Latest member
Advally Service

Trending content

Back
Top