What did you do to/in your 5th Gen today?!
- Thread starter DEKA3
- Start date
KKTRD-PRO
New member
I watched this while I was waiting for my runners to be installed. Cool video!
Sent from my iPhone using Tapatalk
<<<<
Senior Member
Do you have part number for caps?
Part # is PT280-35221-5F
Replaced the worn, gross wheel with a fresh one. Easiest steering wheel to remove/replace out of many vehicle I've worked on.
And got gas.
part number for it and cost? Wouldnt mind replacing mind , its not too bad yet.
Recently installed a lock'er down 4 digit console safe , found it off FB marketplace at $100 shipped. It was new in box! Great fit and should hopefully do the job.
KKTRD-PRO
New member
Put up a photo once you get her in if possible. It's on my short list of interior mods.
I tried and this site isnt the best for uploading pictures. Its a great fit and would recommend it, send a PM with # ill send a text
MoonRakerSCM
New member
Continued my electrical update with an Anytime backup/front camera install. I ripped apart the dash to cut and splice a bunch of random wires... just hoping for the best-
Ran all the wires and hooked them up and it worked like a charm. I put the dash back together and installed the rocker switch on the blank spot next to the ignition key. It illuminates when pressed down or up for the respective cameras-
I finally did some actual damage to my vehicle and drilled a hole through the front bumper. The camera looks great, is barely noticeable, and I'm quite pleased with the install.
Now I can see in front of the 50 ft long hood when I'm off-roading and cresting a hill or going over some not so friendly rocks.
Ran all the wires and hooked them up and it worked like a charm. I put the dash back together and installed the rocker switch on the blank spot next to the ignition key. It illuminates when pressed down or up for the respective cameras-
I finally did some actual damage to my vehicle and drilled a hole through the front bumper. The camera looks great, is barely noticeable, and I'm quite pleased with the install.
Now I can see in front of the 50 ft long hood when I'm off-roading and cresting a hill or going over some not so friendly rocks.
cool! whered you get the switch?Continued my electrical update with an Anytime backup/front camera install. I ripped apart the dash to cut and splice a bunch of random wires... just hoping for the best-
Ran all the wires and hooked them up and it worked like a charm. I put the dash back together and installed the rocker switch on the blank spot next to the ignition key. It illuminates when pressed down or up for the respective cameras-
I finally did some actual damage to my vehicle and drilled a hole through the front bumper. The camera looks great, is barely noticeable, and I'm quite pleased with the install.
Now I can see in front of the 50 ft long hood when I'm off-roading and cresting a hill or going over some not so friendly rocks.
MoonRakerSCM
New member
It came in their full kit but you can also buy it separately. It illuminates the 'rear' light when clicked down and both lights when clicked up. I don't have it hooked up to my dash lights or anything. Looks clean, works great (though just installed it).
Products
– Anytime Backup Camera
honda250xtitan
New member
Gave em both a good wash.
ooooooh buddy!
MoonRakerSCM
New member
MoonRakerSCM, did you not have this button in that spot?:
Nope! Twas a blank sitting there. I've heard it was used for a Party Mode button but think that they got rid of it for the 2017 SR5s?
What exactly does 'party mode' do?
TexasTJ
New member
I know, everyone loves that Cement Gray
Or did you mean the 800+hp sedan next to it?
Dynamic Diodes Ditch Lights
Thanks to John Collier at Diode Dynamics for helping me get the right Ditch lights for my 2021 Nightshade! I am in the process of separating the circuits and adding switches to be able to control left and right lights separately. Real easy install, enclosed harness is plug and play and brackets install quick!
Thanks also to my 4Runner bud in Ottawa Dan Rogall for a fun ride down some local country roads last weekend and his pro photography skills! These lights are brighter than OEM headlights and very stealth!
Thanks to John Collier at Diode Dynamics for helping me get the right Ditch lights for my 2021 Nightshade! I am in the process of separating the circuits and adding switches to be able to control left and right lights separately. Real easy install, enclosed harness is plug and play and brackets install quick!
Thanks also to my 4Runner bud in Ottawa Dan Rogall for a fun ride down some local country roads last weekend and his pro photography skills! These lights are brighter than OEM headlights and very stealth!
Attachments
Jacobsmith
New member
I have a desire and some free money to make my 4Runner better using Homologation Specials Were a Unique Breed of Car Models - AutomoBible special offers, in particular to improve the headlights. I bought BraveWay LED bulbs for this purpose. They are smaller than the average size LED bulbs, so they fit perfectly in our headlights. Much more light - but still not enough for me...
Installation is very simple - take out the halogen bulbs - which I also changed to a brighter bulb. Let me explain - in the lens no bulb does not blind! Headlights are adjusted.
Installation is very simple - take out the halogen bulbs - which I also changed to a brighter bulb. Let me explain - in the lens no bulb does not blind! Headlights are adjusted.
Last edited:
honda250xtitan
New member
I know, everyone loves that Cement Gray
Or did you mean the 800+hp sedan next to it?
G]
minivan meh
the SS thoooooo. i dig the holden badges.
Similar threads
