Roger that. Thanks. When mine were installed we went with the lowest level, which appears very close to level. I’m not seeing any drivers side lean on mine.
What did you do to/in your 5th Gen today?!
- Thread starter DEKA3
- Start date
Roger that. Thanks. When mine were installed we went with the lowest level, which appears very close to level. I’m not seeing any drivers side lean on mine.
johnnygraphic
Member
Tested the new Harbor Freight foam Cannon. I swapped out the orifice for a 1.1
The "foam Cannon" the pressure washer came with
New one
Strongly suggest the MJJC Pro foam cannon. Tons of excellent shaving cream level foam. Check out imjoshv’s YT channel for comparison tests. I have one and love it. Works great and is a game changer for washing cars. Same with a pressure washer which I assume you have.
Sent from my iPhone using Tapatalk
jtgrinsell
New member
Painstakingly worked on my suspension this weekend, at least 7 hours and 3 trips to Autozone later I got my JBA UCAs on, Dobinsons 302/505 installed, and upgraded to 285s - Cooper AT3 XLTs. Had a BMC and some bumper trimming done earlier in the week in preparation for the new tires, alignment will happen tomorrow.
Really happy with the new stance and can’t wait to go flex on some curbs at the mall.
Sent from my iPhone using Tapatalk
Really happy with the new stance and can’t wait to go flex on some curbs at the mall.
Sent from my iPhone using Tapatalk
RedRunner_87
Senior Member
That is actually were I got the review from the Harbor Freight foam cannon with the 1.1 orifice. Love his videos. So far the HF one is working 100x better than the old one. I will probably upgrade down the road. Right now using the HF Pressure Washer and now there upgraded Foam Canon. I will be buying the Maxine Clay bar applicator disc because of his review. The Camrys paint is a hot mess, hopefully that will help.
johnnygraphic
Member
Painstakingly worked on my suspension this weekend, at least 7 hours and 3 trips to Autozone later I got my JBA UCAs on, Dobinsons 302/505 installed, and upgraded to 285s - Cooper AT3 XLTs. Had a BMC and some bumper trimming done earlier in the week in preparation for the new tires, alignment will happen tomorrow.
Really happy with the new stance and can’t wait to go flex on some curbs at the mall.
Sent from my iPhone using Tapatalk
Same lift I’m putting on our 4Runner
Wheels too hopefully
Sent from my iPhone using Tapatalk Pro
jtgrinsell
New member
You can save $200 on the tires right now if you order from Discount Tire Direct on eBay - https://www.ebay.com/str/discounttiredirect
baldrik78
New member
I ran the same tires for close to 60k miles. These are probably the best all-around AT tire on the market. I just wish they made them in a tall skinny.
Painstakingly worked on my suspension this weekend, at least 7 hours and 3 trips to Autozone later I got my JBA UCAs on, Dobinsons 302/505 installed, and upgraded to 285s - Cooper AT3 XLTs. Had a BMC and some bumper trimming done earlier in the week in preparation for the new tires, alignment will happen tomorrow.
Really happy with the new stance and can’t wait to go flex on some curbs at the mall.
Sent from my iPhone using Tapatalk
Let me guess, the stupid washers that go on the inside of the control arms. Those where a pain in the ass for me.
Looks good.
LakeRunr
Member
Showing off my perfectly color-matched anytime backup camera button, freshly installed with custom LED backlight to match the rest of the OEM backlights on the 4Runner's dash. The original anytime backup camera button is backlit with a harsh bright blue that sticks out like a sore thumb, and also reflects terribly on the inside of the driver's door window at night. Now it blends into the dash and barely reflects off the window at all.
Showing off my perfectly color-matched anytime backup camera button, freshly installed with custom LED backlight to match the rest of the OEM backlights on the 4Runner's dash. The original anytime backup camera button is backlit with a harsh bright blue that sticks out like a sore thumb, and also reflects terribly on the inside of the driver's door window at night. Now it blends into the dash and barely reflects off the window at all.
Nicely done.
jtgrinsell
New member
You and James over on the FB group helped me land on these tires. He talked me into the Nokian Outposts but Discount Tire couldn't get them in.
jtgrinsell
New member
lol, I definitely dropped one into the abyss and thought I was screwed but eventually found it. I couldn't break the balljoint free to save my life and the pitman arm puller I got from Autozone was damaged but didn't realize it until I was home and then had to make the return trip.
Also had issues with the nut on top of my shocks and had to find a new one to go on. It was a hot mess of a day.
Ph03n1x24
Member
Made an audio mistake on my wife's 2011 4Runner SR5
So, I finally finished the complete audio upgrade of my wife's 4Runner. Replaced all 8 speakers with high end speakers as well as a new double-din head unit with amp.
I made the mistake of giving her my subwoofer box and amp pushing 2 12" subs. Her audio sounded phenomenal once everything was tuned just right. She kept thanking me over and over for the upgrade, that is until she opened the back hatch and saw the big azz sub box. That's when the fight started!
She did NOT approve of the big boom box from the 80's in her car. Like I had somehow desecrated her beloved `yota.
Needless to say the big sub box is gone (need to sell it as it's brand new) and it's been replaced with a BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer that fit neat and discreet under the passenger side seat. --> Amazon.com
Installation was relatively simple and straight-forward but it was time consuming to remove the seat and wire up properly.
I highly recommend this unit, especially if you find yourself in a similar situation as I did where compromising for space is the ONLY option.
This unit is a great addition to anyone's sound system. It really puts out a lot of sound for it's size.
So, I finally finished the complete audio upgrade of my wife's 4Runner. Replaced all 8 speakers with high end speakers as well as a new double-din head unit with amp.
I made the mistake of giving her my subwoofer box and amp pushing 2 12" subs. Her audio sounded phenomenal once everything was tuned just right. She kept thanking me over and over for the upgrade, that is until she opened the back hatch and saw the big azz sub box. That's when the fight started!
She did NOT approve of the big boom box from the 80's in her car. Like I had somehow desecrated her beloved `yota.
Needless to say the big sub box is gone (need to sell it as it's brand new) and it's been replaced with a BOSS Audio Systems BAB8 Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer that fit neat and discreet under the passenger side seat. --> Amazon.com
Installation was relatively simple and straight-forward but it was time consuming to remove the seat and wire up properly.
I highly recommend this unit, especially if you find yourself in a similar situation as I did where compromising for space is the ONLY option.
This unit is a great addition to anyone's sound system. It really puts out a lot of sound for it's size.
Attachments
kmeeg
New member
Not a mod done today. I did it last month. But sharing as it might help someone looking for headlight bulb upgrade. This Lasfit LA series bulb was the closest I've seen to stock LED housing headlight.
https://www.youtube.com/watch?v=YcW5-EwZ-HI&feature=youtu.be
This is Lasfit LA series low beam vs stock LED headlight
https://www.youtube.com/watch?v=YcW5-EwZ-HI&feature=youtu.be
This is Lasfit LA series low beam vs stock LED headlight
Attachments
mrblah
Senior Member
how much was it?
SlvrRnnR
New member
$150 per visor for the universal fit version I ordered. Pricey but excellent quality
YouEnjoyMyYota
Junior Member
I'm glad to hear that I'm not the only one with these types of days! lol
mrblah
Senior Member
Similar threads
