What Did You Do To Your 3rd Gen Today?

Status
Not open for further replies.
Tail wind downhill in neutral? 4 cyl? The absolute best we have seen since ownership has been 22.5 driving like an 80 year old in a cadillac.

I almost didn't believe it myself. I have a limited with the 3.4 and 4x4. There wasn't any tail wind, I just followed behind a semi for about half the trip. I wasn't in any rush so I only averaged 58 mph (according to my Scangauge II). The elevation changes is only about 650'.

I filled up before and after the trip and hand verified the 25.8 that the Scangauge read. I usually average 21-22 mpg at 65-70 mph
 
Last edited:
I almost didn't believe it myself. I have a limited with the 3.4 and 4x4. There wasn't any tail wind, I just followed behind a semi for about half the trip. I wasn't in any rush so I only averaged 58 mph (according to my Scangauge II). The elevation changes is only about 650'.

I filled up before and after the trip and hand verified the 25.8 that the Scangauge read. I usually average 21-22 mpg at 65-70 mph

Drafting (not drifting) is a proven fact. However, in real life drafting a semi is dangerous and probably not worth the risk.
 
Drafting (not drifting) is a proven fact. However, in real life drafting a semi is dangerous and probably not worth the risk.

I was about 8 or 9 car lengths behind. I was able to see his mirrors the entire time. After he exited my mpg dropped only about 1 on the instantaneous read out. I would never endanger myself in order to gain mileage.
 
Installed new 0mm offset FN Five Stars in matte black with the new style flat center caps.

11705115_997378586953751_4780284363286540547_n.jpg
 
the other day i did the drivers side TRE and lower ball joint. today i was finishing up on the passenger side, but as i was removing one of the bj bolts, it snapped, so i spent the whole day trying (as in never did) to remove it. will have to try again tomorrow, or get some help. :(
 
cleaned it up, packed it up... the truck is ready, im ready...
just a few more days of work , and then the instant im off work... im driving straight to a grocery store... then im gonna get lost in the woods
 
since i have summer break from school. got my air comp mounted, intake and f+R voltage meter
 

Attachments

  • voltage.jpg
    voltage.jpg
    127.8 KB · Views: 521
  • voltage 2.jpg
    voltage 2.jpg
    132.8 KB · Views: 482
  • intake.jpg
    intake.jpg
    143.6 KB · Views: 484
Been running around with no spare tire because I wanted to repaint the rusty steel wheel,decided to just mount the tire on an aluminum wheel so no more rust issues.

High-wattage HID ballasts arrived in the mail for a planned projector retro,may test them on the fog lights for now.
 
Last edited:
Pulled the blower motor to see why it sounded so funky, guess I lost some insulation from somewhere lol. I also did the final install on the AEM FI/C 6.

_P9GRv3aEDnXxgRu1yceDVNOOWlg7FO_D68tVlPmS3Q=w513-h911-no


8VJrlmgb-qMMDVZiWo1Qlwccox_LmLRVBzlFDLfH-zA=w513-h911-no
 
Pulled the dash and heater core out. Today is reinstallation and hopefully driving test and if I'm lucky I'll finally get the lift on that's been sitting in my garage for 4 weeks.
 
I had an obnoxious amount noise from my AC blower motor but I was unlucky, once I took it out it pretty much fell apart and a ton of black soot poured out of the motor. Got a cheap OE one from Amazon that doesn't have the crap jumper cables and included the fan.

No AC in AZ is a death wish. No bueno!
 
Sorry, I forgot to link the parts in the original post. It really is a super cheap and easy way to get back your full reception potential.

Also, I see you mentioned that you want to "fix" your dash LEDs. Are they burning out on you? I've considered replacing my gauge cluster bulbs with brighter white LED bulbs, but haven't yet because it's not worth it if there are hotspots and bulb life longevity issues. I don't want to have to replace them every year or two. How long did your bulbs last?


Amazon.com: Metra 40-UV43 Male to Female Motorola Antenna Cable: Car Electronics

Amazon.com: Scosche Mda-B Micro/Delco Antenna Adapter Tip: Car Electronics


The problem I didn't know I had and now solved...I love this forum! Went ahead and added a switch to control the power antenna while I was at it!
 
Status
Not open for further replies.

Members online

Forum statistics

Threads
278,316
Messages
3,554,120
Members
248,016
Latest member
Advally Service

Trending content

Back
Top