jmferg
New member
Finally, someone who didn't mount it to the roof.
Sent from my iPhone using Tapatalk
What Did You Do To Your 3rd Gen Today?
- Thread starter pin8246
- Start date
- Status
Finally, someone who didn't mount it to the roof.
Sent from my iPhone using Tapatalk
2ndhandyotaman
Member
I filled up on Tuesday night and did a lot of highway driving between Wednesday and today, about 85% highway. I hit 310 miles before the low fuel came on and stayed on, hadn't had that happen before.
I was lucky enough to score a set of SCS RAY10 wheels!
Those look awesome
EmDeeAitch
New member
Installed a PanaVise dash mount bracket so I can mount a tablet that will show Maps/OBD2 info.
Also had to weld a bolt to my front diff drain plug after the hex head stripped out… Luckily I had a spare drain plug.
Also had to weld a bolt to my front diff drain plug after the hex head stripped out… Luckily I had a spare drain plug.
Last edited:
murdered_3rdgen
New member
Installed HID's into headlights and LED's into corner lens', license plate lights, and interior dome lights.
Also, got a chance to test out 4lo and the stock locker and WOW I had no idea a stock toyota locker would be this impressive.
I've got a Jeep wrangler also and i'm really loving the feel of the 4runner alot better.
stock on the left. 6000k HID on the right.
out in the hills across the street from my house testing the locker.
Also, got a chance to test out 4lo and the stock locker and WOW I had no idea a stock toyota locker would be this impressive.
I've got a Jeep wrangler also and i'm really loving the feel of the 4runner alot better.
stock on the left. 6000k HID on the right.
out in the hills across the street from my house testing the locker.
murdered_3rdgen
New member
Jealous ! Nice find
2ndhandyotaman
Member
I purchased 2 14mm craftsman wrenches, cut them up and made one long 14 mm wrench and one mini-stubby wrench with the left over pieces. The long one is cleaned up, I just didn't take a pic of it. I had to anneal them with a MAPP cylinder, I'll find out on Monday if I did it right when I go to use it for the first time.
madesicc88
New member
There might be a little bit of body filler on my door, trying to deal with a small rust spot on my lower rear passenger door. Might be a bit more work than anticipated.
Sent from my LG-H700 using Tapatalk
Sent from my LG-H700 using Tapatalk
97t4r81
New member
Installed a PanaVise dash mount bracket so I can mount a tablet that will show Maps/OBD2 info.
Also had to weld a bolt to my front diff drain plug after the hex head stripped out… Luckily I had a spare drain plug.
I'm planning on just welding a 17mm nut to that plug so I don't have to carry a 12mm hex key. Maybe I'll just get a plug with a raised hex area to swap. Go on ya for getting it out.
EmDeeAitch
New member
Yeah, I was thinking about welding a nut to the new plug beforehand as well. Decided to just torque it to the correct spec and hope it doesn't happen again next time!
HappyHooligan
New member
Never checked the air filter when I bought her.
<img src="https://image.ibb.co/d54zzn/IMG_7269.jpg" alt="IMG 7269" border="0" />
<img src="https://image.ibb.co/d54zzn/IMG_7269.jpg" alt="IMG 7269" border="0" />
NWFL4Runner
Member
Smashed my crank shaft pulley into my radiator. So, in other words, ordered a new radiator...
4Runner4Leon
Senior Member
^^^ Dreaming that one day I'll be able to do that...
LittleCaesar
New member
How did that happen?
Being in Florida are you going to order one of those 3 core aluminum Champions?
LittleCaesar
New member
With that knowledge do you know what the throttle body looks like?
jjf8
New member
Replaced mine
After 2 years of no problems on my 02 with an engine full of sludge, the frame finally gave it up to rust. Took me only 3 weeks to find this one. Spend a lot of its life in AZ . And to top it off it's Desert Dune which I thought I would never find,
Hopefully got lucky, Have to change the radiator for piece of mind and I am sure a few other things, such as the P1036 code that popped up after a 300 mile maiden voyage shore run. Literally got home, dropped into reverse to back in and the CEL popped on. Came up as a p1036. down flow o2 sensor
150K, wheels and trim are rhino lined, PO did a nice job, newer tires /brakes, TB done, new plugs wires, everything works including clock and antenna, no rip cloth interior,. Ran great on the shore run till I backed into my driveway, Going to reset the code, see if comes back. Take it from there,
After 2 years of no problems on my 02 with an engine full of sludge, the frame finally gave it up to rust. Took me only 3 weeks to find this one. Spend a lot of its life in AZ . And to top it off it's Desert Dune which I thought I would never find,
Hopefully got lucky, Have to change the radiator for piece of mind and I am sure a few other things, such as the P1036 code that popped up after a 300 mile maiden voyage shore run. Literally got home, dropped into reverse to back in and the CEL popped on. Came up as a p1036. down flow o2 sensor
150K, wheels and trim are rhino lined, PO did a nice job, newer tires /brakes, TB done, new plugs wires, everything works including clock and antenna, no rip cloth interior,. Ran great on the shore run till I backed into my driveway, Going to reset the code, see if comes back. Take it from there,
Attachments
Last edited:
HappyHooligan
New member
no, but maybe next week I'll find out
- Status
Similar threads
