bitchaaz
New member
What was his name? :hiding:
I started on a speaker box that will fit over the passenger side wheel well.
I should have it done today and will post pics later.
What Did You Do To Your 3rd Gen Today?
- Thread starter pin8246
- Start date
- Status
What was his name? :hiding:
I started on a speaker box that will fit over the passenger side wheel well.
I should have it done today and will post pics later.
3rd gen king
New member
It's my gf of 2 years , but I want to do a box like your building , gotta link or gonna do a write up?
driffter33
New member
I retired it to weekend worrior, with the purchas of a 02 rav4 with 61000mi as a new daily driver! Let the build begin!
Last edited:
dropped 95
New member
Today some new headlights went in my new runner. Still got to fix it up a bit before I worry about any modifications.
driffter33
New member
pics or it didn't happen!:reddance:
tbst
New member
z28forlife
New member
I'm about to do my trans fluid.
jham
New member
Link isn't working for me...
bitchaaz
New member
I have to give credit to Limited2K for giving me the inspiration to build my sub box similar to his. I already had the amp, rustoleum "stone finish" spray paint and some 3/4" plywood laying around. I bought a kicker 10" sub from Best Buy for $45.00. I don't know why I didn't do this when I originally bought my truck. I will never buy another sub again, other than Kicker. The sound is amazing. It's not the most perfect thing, but I'm very pleased with the outcome. I need to go to Lowes and find some kind of screening to put on it. Total cubic ft. came out to .88. Now with the pics.
Kenwood Mono amp fits perfectly under drivers seat.
Dry fit in place. I ended up having to cut an angle at the bottom left corner.
Fits nicely along there
Cargo space at the neatest it will ever be. I also went ahead and cut a peice of the plywood and put some legs on it so I had a shelf unit there also.
Icing on the cake
Kenwood Mono amp fits perfectly under drivers seat.
Dry fit in place. I ended up having to cut an angle at the bottom left corner.
Fits nicely along there
Cargo space at the neatest it will ever be. I also went ahead and cut a peice of the plywood and put some legs on it so I had a shelf unit there also.
Icing on the cake
Last edited:
GottaBeTRD
New member
that looks good! ^^^ if i wasn't so scared of a table saw I would prob try to do this lol
thorridder
New member
bitchaaz
New member
No reason at all. That's just what came to me naturally. Im right handed and I just started measuring on the right side I guess. I didn't even consider the left side. I just keep jumper cables and some ratchet ties in the cargo box, so it didn't seem to me that I would need continuous access to it.
It could very easily go on the left side.
3rd gen king
New member
Oh gosh do I wish I had wifi in my apt, (on my phone) but I have a pic of her in the runner and a bit of something is on her!! But I'll spare y'all.
Rockdawg84
New member
So I got the TC UCA installed, Taco LBJ, and OTRE installed, and front Diff is out. sprayed everything down with purple power (bad CV boots make a huge mess). Now I have to go to bed. Hopefully tomorrow after work I can get the new front diff with 4.88's and ARB locker back in and get everything back together in the front. lots of work but gonna be sweet:hatsoff:
awpsome
New member
Pictures? Mounts as in to use the hi lift on the truck?
I bought one as well. Realizing without sliders there isnt anywhere to jack up from haha
Socco
New member
Pics to follow, won't be able to get some (pics) until Thursday. They are to mount the jack on the floor of the truck just inside the back door. Yeah, Hi Lift wont do you much good without aftermarket sliders or bumpers. You could buy one of these Lift-Mate to give you something to work with though.
- Status
Similar threads
