What did you do with your 4runner today?

not the best pics (inside my car).

7237D748-DB36-416D-B5A9-16A4668C49DD_zpsmsqsoeti.jpg~original


Another concern is the voltage. The turn signal assembly on the case reads: 13.5V. B/c our trucks are 12V, I'm thinking this shouldn't be too much of a problem. Anyone who is knowledgeable on the subject, please chime and correct me. Apart for the voltage, I'm guessing the LED might be crap, so I'll study them to see how easy it will be to replace them when the times comes they explode. Not pictured is the extra wire they supplied.

Puddle lights (LEDS), supposedly they light up white. I plan on wiring them so they light up ONLY when the "inside door pubble light" lights up. I was going to have them light up when the running board lights turn on, but figured, "naaaw".
If I have any updates, of course I'll post.

:banana:

i know my cars and thats NOT a picture from inside your car, well inside YOUR car, not your 4runner LOL looks like a pre-2010 civic to me

no your leds will be fine. LEDs have a operating range of 9-33volts IIRC

also you sure that cover will work? here are some pictures for reference since i have my apart for my right turn signal camera and puddle lights. also BTW you will need to get creative on how you do the puddle lights. you will need to run the wires to the drivers side fuse box and tap into the middle wire of the top right connector that loosk liek a ribbon.



you are welcome to bring them down for me to test fit them ONTO MY mirrors tomorrow LoL since i have them apart already :)

Other than spending a lot of time trying to figure out the best, most cost effective, way to get a better stereo (or at least an Aux in) for my 2005, I haven't done much to it.

Torn between just replacing the whole head unit with a good, ipod/bluetooth/USB/AUX unit... but losing my steering wheel controls and most likely most of my JBL speakers.

Or doing the Blitzsafe TOY/AUX DMX V.2 piece and leaving the rest as-is.

Have climate control bulbs on order, looking forward to getting that all lit up properly. Researching leveling lift (to keep my XREAS).

Haven't had a car that gave me the mod bug for over 3 years now. This one's bit me hard. :)

PM me, i have some New old stock pioneer and kenwood around the $125-175 range, everything you looking for. also have in stock all the modules you need to retain JBL and steering wheel controls. you not loosing anything. dont kid yourself with the blitzsafe stuff.
 
Other than spending a lot of time trying to figure out the best, most cost effective, way to get a better stereo (or at least an Aux in) for my 2005, I haven't done much to it.

Torn between just replacing the whole head unit with a good, ipod/bluetooth/USB/AUX unit... but losing my steering wheel controls and most likely most of my JBL speakers.

Or doing the Blitzsafe TOY/AUX DMX V.2 piece and leaving the rest as-is.

Have climate control bulbs on order, looking forward to getting that all lit up properly. Researching leveling lift (to keep my XREAS).

Haven't had a car that gave me the mod bug for over 3 years now. This one's bit me hard. :)

Replace the HU. Stock is a piece of crap. Right side knob is all over the place on mine, and this morning it started tuning downward from 99.9 to static on 99.7 or 99.5 when I stopped at lights. Don't waste any money on the factory HU setup IMO.
 
True, but the advantage of random orbital buffers over rotary buffers is that it is extremely difficult to burn the paint with a random orbital buffer compared to a rotary one. That is why a novice can pick one up and get the hang of it pretty easily.

The Porter Cable 7424XP and 7346SP (what I have) are random-orbit, so I thought!

I have some Minzerna FG400, SF4000 and sealant to run through after I clay. All I need is time and the desire to do it. Now that ski season is over, I should get to it soon.
 
Looks really good. I really like the silver!

Funny thing is momo, you are the one who turned me on to the set up! I think we have the exact same deal. Next step is the the Whitson rack and light bar. Those may have to wait until gift giving season though, haha!
 
did this late last night.


headphone warning

<iframe width="560" height="315" src="//www.youtube.com/embed/FvK93Pw84TA" frameborder="0" allowfullscreen></iframe>
 
i know my cars and thats NOT a picture from inside your car, well inside YOUR car, not your 4runner LOL looks like a pre-2010 civic to me

no your leds will be fine. LEDs have a operating range of 9-33volts IIRC

also you sure that cover will work? here are some pictures for reference since i have my apart for my right turn signal camera and puddle lights. also BTW you will need to get creative on how you do the puddle lights. you will need to run the wires to the drivers side fuse box and tap into the middle wire of the top right connector that loosk liek a ribbon.

you are welcome to bring them down for me to test fit them ONTO MY mirrors tomorrow LoL since i have them apart already :)

Yep, that's inside my car. My DD is a 2007 Civic (which I mod too, LOL). Anyway, I don't get into the philly area until 6pm (ish), so tomorrow (Wednesday) is out of the question. Thanks for offering to test fit them. I'd love to have to test fitted so I don't open mine up in case nothing lines up. Like [MENTION=55855]zopperman[/MENTION] said, I don't trust this product, but it was too cool to pass up. I could probably come by on Thursday morning??? I'd only be able to hang out for a couple hours...... let me know!
 
Yep, that's inside my car. My DD is a 2007 Civic (which I mod too, LOL). Anyway, I don't get into the philly area until 6pm (ish), so tomorrow (Wednesday) is out of the question. Thanks for offering to test fit them. I'd love to have to test fitted so I don't open mine up in case nothing lines up. Like [MENTION=55855]zopperman[/MENTION] said, I don't trust this product, but it was too cool to pass up. I could probably come by on Thursday morning??? I'd only be able to hang out for a couple hours...... let me know!

pm sent with contact info [MENTION=55855]zopperman[/MENTION] might as well come get his skids too
 
haha yeah I need those... thursday night/friday would be better for me, big paper due tomorrow and class all day etc. :ranger:

Aaah, procrastinator? Nice, I was one too. LOL

I hated doing papers, one part of college I don't miss.

Yeah, if Steve and I can confirm tomorrow, would be cool to see ya. I was going to change the oil in the runner Thursday, but it can wait a few days.
 
Been meaning to do this, finally got a chance to add some leds to my cup holders. Wired to my radio remote turn on, I do use a relay for my remote turn on for my amps.
 

Members online

Forum statistics

Threads
278,316
Messages
3,554,114
Members
248,016
Latest member
Advally Service

Trending content

Back
Top