What did you do with your 4runner today?

LTDSC said:
insane you're the same height and im on 265/70s
Click to expand...

I've noticed a lot of measurements are all over the place, are you measuring center of wheel or front or rear of fender? I have superflex springs with an additional 1" spacer and am the same height as others without spacer, oh well
 
S p a r k y said:
I've noticed a lot of measurements are all over the place, are you measuring center of wheel or front or rear of fender? I have superflex springs with an additional 1" spacer and am the same height as others without spacer, oh well
Click to expand...

center of the wheel, ground to fender. I too have Superflex in rear without spacer on passenger side.
 
LTDSC said:
center of the wheel, ground to fender. I too have Superflex in rear without spacer on passenger side.
Click to expand...

Ah that brings me to another crazy thing. So i had just the superflexes in with the 1.5" on driver side, just like everyone else does. It threw everything way off, crazy measures, pass front low, driver front high etc. I took the 1.5" spacer out of driver lean and everything is perfect measures now. Who would have thunk it. So mine is right and nobody else is right lol.
 
S p a r k y said:
Ah that brings me to another crazy thing. So i had just the superflexes in with the 1.5" on driver side, just like everyone else does. It threw everything way off, crazy measures, pass front low, driver front high etc. I took the 1.5" spacer out of driver lean and everything is perfect measures now. Who would have thunk it. So mine is right and nobody else is right lol.
Click to expand...

i didnt have any spacer until this weekend. My toytec superflex springs were fine but i finally noticed an inch lower in the rear on driver side and about a 1/2" on the front over the higher passenger side. I put a 1.5 in and its back to even all around.
 
No problem! I'm really digging the gloss finish. Def post up some closeups when you get a chance.

Side note but appreciate you keeping us updated on Josh...terrible news.
 
HokieRunner said:
No problem! I'm really digging the gloss finish. Def post up some closeups when you get a chance.

Side note but appreciate you keeping us updated on Josh...terrible news.
Click to expand...

Yeah, i wanted to go with the Satin finish since that is what i had used on those step tubes. It is holding up on them great, so it should be good up on the roof.

I hated to hear that about his dad's passing, so all we can do is to pray for his family to have some peace and comfort during all this.
 
Thanks man. I love the look of the light bar, but haven't wired it up yet. I was going to get Gaterose to help me with that yesterday, but had to have another spinal block done, so i have been out of it. I can't wait to get it all hooked up. Thanks again for your help!
 
Installed toytech 2" super flex and 5100 last night
za2e5yby.jpg
y2esemyv.jpg
 
I turned off the surround sound on the stock JBL system (with RDS!). Amazing how much better it sounds. Better front stage and I'm hearing details in songs I never heard before. It's a shame I never did that before.
 
You must log in or register to reply here.

Similar threads

F
Extended Lower Control Arms for 4th Gen?
Replies
4
Views
45K
aemravan
A
0
New 03 4.7 with over 300k miles questions.
Replies
19
Views
3K
04run&gun
0
B
Opinions needed related to my fuel pressure loss vapor lock issue..
Replies
12
Views
4K
JustTroItIn
JustTroItIn
T
2001 4runner Head Gasket Replacement
Replies
19
Views
16K
alia176
A
F
3rd gen 4runner cooling question.
Replies
19
Views
4K
gh25_
gh25_

Members online

Total: 2,022 (members: 1, guests: 2,021)

Forum statistics

Threads
278,316
Messages
3,554,120
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top