ieatfish
Member
No worries long as you properly adjusted them to hit the road surface rather than straight into rear view mirrors. The real turds are people who install brighter lights or get a lift and do not readjust their lights.
What did you do with your 4runner today?
- Thread starter NorthGa4R
- Start date
No worries long as you properly adjusted them to hit the road surface rather than straight into rear view mirrors. The real turds are people who install brighter lights or get a lift and do not readjust their lights.
Did some cutting and hammering to make 35s fit. This is a 255/85 Mickey on stock wheels that is the set up on my friend's 4th Gen. I will have no clearance problems, although the stock wheel makes the tire close to the SPC UCA on my truck. However, my wheels are -10 offset while the stock wheel is +30, so i'm pretty sure that 35x11.5 tires are going to be the winner. I'm planning on ordering some this week
4RuNnMyLife
New member
Double checked them today on lunch and they appear to be ok. We'll see if anyone complains :thumb3:
Zero0575
Member
Installed some goodies this weekend!
-Auxbeam 3" ditch pods
-Midland MTX275 hard mounted radio
Mounted the mic with Magnetic Mic, Offroam vent mount and 67 designs piece specifically made to work with the magnetic mic.
-Auxbeam 3" ditch pods
-Midland MTX275 hard mounted radio
Mounted the mic with Magnetic Mic, Offroam vent mount and 67 designs piece specifically made to work with the magnetic mic.
Attachments
Hi-desertT4R
Member
Picked up a replacement taillight housing while I was in Vegas today from a salvage yard to replace the one that got broken wheeling a couple weekends ago. Installed it when I got home.
Which mounts are these for the pod lights?
I’m replacing the head gasket on my ‘05 4Runner. Looks like on of the injectors is questionable as well. Probably from cylinder 6as well.
Question I have… I ran across a set of injectors that a guy pulled from a 2013 with only ~10k on it. Pulled for a super charger upgrade. Could I use these on my 05 4Runner. Both have the 4.0L. But looks like might be different part numbers.
Question I have… I ran across a set of injectors that a guy pulled from a 2013 with only ~10k on it. Pulled for a super charger upgrade. Could I use these on my 05 4Runner. Both have the 4.0L. But looks like might be different part numbers.
FoundedSine14
New member
You should try them and let us know what happens!
Zero0575
Member
They're actually for the Tundra, but fit our 4runners as well. Found them from a post on here. They're Cali Raised.
4th Gen Hood x Tundra Ditch Light Bracket? Yep.
Bluesky 07
Senior Member
Replaced my OEM ignition coils with TRQ's ICA61760 from 1A Auto. No issues with the originals, this is preventative at 252K.
Have to give kudos to 1A Auto/TRQ. I now have their coils and LCAs with a set of tie rods awaiting install. Parts are solid and they get extra credit for their remarkable library of 4th Gen instructional videos.
Have to give kudos to 1A Auto/TRQ. I now have their coils and LCAs with a set of tie rods awaiting install. Parts are solid and they get extra credit for their remarkable library of 4th Gen instructional videos.
MrSeth
Member
Did a 1 day shakedown run in Arkansas on the new 315's. Ended up eating a rock in between the treads, patched it and headed off the trail to get it fixed. Thank God for tire plugs and on board air systems.
Shakedown Run by Seth Schueller, on Flickr
Shakedown Run by Seth Schueller, on Flickr
Shakedown Run by Seth Schueller, on FlickrShakedown Run by Seth Schueller, on FlickrGen 5 injectors in a gen 4?
I’m in the process of a head gasket replacement on my GEN four. I pulled my injectors and had them tested and cleaned. One is bad. I found locally a guy selling a set of G5 injectors. I picked them up because they were cheap. Can I use these Gen 5 injectors in my GEN four. Both were from the 4L engine.
The extra set of injectors that I picked up only had 7500 miles on them. Would be nice to make these swap in. Dimensionally they are identical between the two.
I’m in the process of a head gasket replacement on my GEN four. I pulled my injectors and had them tested and cleaned. One is bad. I found locally a guy selling a set of G5 injectors. I picked them up because they were cheap. Can I use these Gen 5 injectors in my GEN four. Both were from the 4L engine.
The extra set of injectors that I picked up only had 7500 miles on them. Would be nice to make these swap in. Dimensionally they are identical between the two.
Similar threads
