Will these sway bar end links work?

[tmaxx13]

Im needing to replace my front Sway bar end links, I thought I saw someone use these rear 94' 4runner on the front of there 3rd gen, can anyone confirm if these are correct.

MOOG Moog-K80380 Rear Sway Bar Link Kit Made by MOOG

I was also think about changing out the following bushings while im down there, are there any others that im missing or any suggestions?

Energy Suspension 8.10103 Steering Rack Bushings Made by Energy Suspension

Prothane 181115 Front Sway Bar and Endlink Bushings - 26mm Made by Prothane

 

[krenaud33]

Energy Suspension 8.10103 Steering Rack Bushings Made by Energy Suspension

That is not the correct kit for 3rd Gen 4runners despite what the website states.

Read my thread regarding this kit.....

http://www.toyota-4runner.org/3rd-gen-t4rs/166908-energy-suspension-rack-bushings-kit-8-10103-a.html

 

[MStudt]

Im needing to replace my front Sway bar end links, I thought I saw someone use these rear 94' 4runner on the front of there 3rd gen, can anyone confirm if these are correct.

MOOG Moog-K80380 Rear Sway Bar Link Kit Made by MOOG

I was also think about changing out the following bushings while im down there, are there any others that im missing or any suggestions?

Energy Suspension 8.10103 Steering Rack Bushings Made by Energy Suspension

Prothane 181115 Front Sway Bar and Endlink Bushings - 26mm Made by Prothane

You can use 4th or 5th Gen rears since they're an inch longer than ours. You can also use 2nd Gen's since they're an inch longer as well. I also make links, and just put together a group buy for them. If you interested feel free to get in on the deal.

 

[krenaud33]

Use the alternate search at the top of the page and you can find lots of threads on sway bar end links.
http://www.toyota-4runner.org/3rd-g...te-search-toyota-4runner-3rd-gen-section.html

Check this thread out as it may have what your looking for.....
http://www.toyota-4runner.org/3rd-gen-t4rs/131057-new-sway-bar-end-links.html

 

[krenaud33]

You can use 4th or 5th Gen rears since they're an inch longer than ours. You can also use 2nd Gen's since they're an inch longer as well. I also make links, and just put together a group buy for them. If you interested feel free to get in on the deal.

your link gives me an invalid thread message. Check your link and repost. I might be interested.

 

[MStudt]

your link gives me an invalid thread message. Check your link and repost. I might be interested.

Fixed

 

[Forrest97]

I just put these on my 97 Limited:


MasterPro® Chassis K90681 - Stabilizer Bar Link Kit | O'Reilly Auto Parts

Energy Suspension 9.5101G - Sway Bar Bushing Set | O'Reilly Auto Parts