WMW Tooob Bumper Build

Perforated metal is in. I think it'll look good once it's black and the top plate is on keeping the light out from that area. Got some cheap signals mounted in while I look for some good LED ones.
 

Attachments

  • 20151002_122944.jpg
    20151002_122944.jpg
    139.9 KB · Views: 298
  • 20151002_122958.jpg
    20151002_122958.jpg
    141 KB · Views: 294
Whitson Metalworks said:
DONE!! and i feel like a proud papa lol! i hit it with some roll-on bedliner then "ghosted" (not trying to sound like a custom painter) my logo onto the front. only other thing i had to do was replace the turn signal relay for the new LED signals behind the mesh and i went ahead and gave the "ugly" a quick coat of black spray paint. Bolted on with shiny new hardware (12 points of attachment!) then cleaned up the giant mess it all left in my garage!
IMAG0339.jpg~original

IMAG0340.jpg~original

IMAG0341.jpg~original

IMAG0343.jpg~original
Click to expand...

I can cannot wait to see GEN 2, complete with the new metal inserts, and grill guard on my 3 gen...
 
Josh your bumper came out epic!! You truly have a natural knack for building hardware for our beloved 4Runners!!

Now that you have your front bumper done...lets get serious and build a rear bumper with a swing-a-way tire carrier. Because you know I need....oops...I'm mean you really need one :peep:....lol!!!

Keep up the great work Sir!! Your my hero :hail::first:

- Russel
 
Thank a ton guys. This one is pretty much done. I got the smittybuilt 9500lb winch in there but am waiting on a hawse fairlead since the roller unit is just huge and doesn't fit the contour of the bumper well at all. The winch fits but it's a magic trick getting the bolts in after the bumper is on. If you had a buddy, or a jack, putting it all on in one shot would be best so you can get at the winch bolts more easily. Hit it with some bedliner and called it good. Should be ready for orders any time now.
 

Attachments

  • 20151003_154309.jpg
    20151003_154309.jpg
    132.9 KB · Views: 448
  • 20151003_155409.jpg
    20151003_155409.jpg
    139.8 KB · Views: 444
  • 20151003_155428.jpg
    20151003_155428.jpg
    139.7 KB · Views: 427
Whitson Metalworks said:
Thank a ton guys. This one is pretty much done. I got the smittybuilt 9500lb winch in there but am waiting on a hawse fairlead since the roller unit is just huge and doesn't fit the contour of the bumper well at all. The winch fits but it's a magic trick getting the bolts in after the bumper is on. If you had a buddy, or a jack, putting it all on in one shot would be best so you can get at the winch bolts more easily. Hit it with some bedliner and called it good. Should be ready for orders any time now.
Click to expand...

Are you still going to do the one with guards?

By the way, it looks great.
 
Ok, finally got the dang hawse fairlead, good grief. Mounted the winch, then put the whole bumper back on. This one is done and ready for my wife's next trip to Target:doh:
 

Attachments

  • 20151016_110220.jpg
    20151016_110220.jpg
    141.2 KB · Views: 366
  • 20151016_110229.jpg
    20151016_110229.jpg
    139.6 KB · Views: 352
[emoji7][emoji7] when's the 4th gen coming?? I'm only 45 minutes south and out of town all next week for work if you want to do some measurements, she's all yours [emoji6]
 
You must log in or register to reply here.

Members online

Total: 1,221 (members: 1, guests: 1,220)

Forum statistics

Threads
278,312
Messages
3,554,085
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top