Ditto, order mine a few weeks ago and was told the bulb was scheduled to be back in stock end of September, here is hoping.
Xenon Depot LED Lighting
- Thread starter propain
- Start date
Ditto, order mine a few weeks ago and was told the bulb was scheduled to be back in stock end of September, here is hoping.
Ditto, order mine a few weeks ago and was told the bulb was scheduled to be back in stock end of September, here is hoping.
CZ-4Runner
New member
Do the XD 9005 Xtreme LED CMB for high beam/DRL flicker at all in DRL mode?
XenonDepot
New member
They still on schedule to arrive by the end of September as they went into production early last week.
Yes, they will if you are not using a Canbus and in some cases, a relay harness may be required as well.
Danny
CF_Machete
Senior Member
Have you considered bending the pin in your resistor to delete the stock DRL? 2 minute mod...
CZ-4Runner
New member
Nah, I don't even have these yet. Just researching. I like the idea of having DRL for safety though. The stock low orange color bothers me and hardly can be seen.
TexasRunner83
New member
Question
I am getting high beamed by other vehicles a lot more frequently than I would like with my HID's from Xenon Depot.
I have the H11 HID Philips 4300K on my 2017 TRD pro. I almost want to remove them and go back to stock. I've had them installed for about 3 weeks now. I reached out to Xenon Depot this morning and the person I spoke to didn't provide much help except for letting me know that they are a brighter bulb and that I may need to point the bulbs up :wtf:.... Needless to say that didn't help much.
I love the color the lights put out. I don't like getting high beamed constantly...
Does anyone have any suggestions as to what I need to do? I would hate to go back to the stock bulbs.
I am getting high beamed by other vehicles a lot more frequently than I would like with my HID's from Xenon Depot.
I have the H11 HID Philips 4300K on my 2017 TRD pro. I almost want to remove them and go back to stock. I've had them installed for about 3 weeks now. I reached out to Xenon Depot this morning and the person I spoke to didn't provide much help except for letting me know that they are a brighter bulb and that I may need to point the bulbs up :wtf:.... Needless to say that didn't help much.
I love the color the lights put out. I don't like getting high beamed constantly...
Does anyone have any suggestions as to what I need to do? I would hate to go back to the stock bulbs.
perhaps they meant point the bulb down. ?
CZ-4Runner
New member
I would think they meant down as well. Especially after a lift/level kit.
doctorres112
New member
Perhaps this video will help?
https://www.youtube.com/watch?v=PBLcojQqT0A&t=3s
Let us know how it works.
-Chris
They are bright/brighter. They just need to be aimed down a hair (especially if you have lifted or leveled).. Take it to any gas station or auto shop if you are not comfortable with doing it yourself and they can aim them to the proper hight in 5 minutes or less using their machine that tells them what height they should be. This is a simple quick fix don't worry.
P.S. There is no need to go back to those crappy dim stockers!
Last edited:
CZ-4Runner
New member
Yes, they will if you are not using a Canbus and in some cases, a relay harness may be required as well.
Danny[/QUOTE]
So is there something offered by you folks that can by added to the 9005 Xtreme LED kit so it can be used as high beam and DRL without the flickering? Thank you.
Danny[/QUOTE]
So is there something offered by you folks that can by added to the 9005 Xtreme LED kit so it can be used as high beam and DRL without the flickering? Thank you.
shyuperman
Member
Thanks to this thread for helping with my decision on HIDs. The 20% off sale last week was a big bonus too.
I was worried about HIDs and cutting the dust cover, but I followed MTN4RNR instructions and the installation was pretty simple and straight forward(minus the length of time it took me to perfect the installation of the new bulbs). My 4runner did cut off when I first tried to start the engine after install, but everything came back up when I restarted again.
I was really impressed with the fast shipping, packaging and the light output. I went with the H11 HID in 5000k to match the Rigid SAE fogs that I have on order. I'm really impressed with the quality and looking forward to checking out the increase light input tonight.
I was worried about HIDs and cutting the dust cover, but I followed MTN4RNR instructions and the installation was pretty simple and straight forward(minus the length of time it took me to perfect the installation of the new bulbs). My 4runner did cut off when I first tried to start the engine after install, but everything came back up when I restarted again.
I was really impressed with the fast shipping, packaging and the light output. I went with the H11 HID in 5000k to match the Rigid SAE fogs that I have on order. I'm really impressed with the quality and looking forward to checking out the increase light input tonight.
XenonDepot
New member
Yes, we offer the PWM ant-flicker module that can be installed with the Xtreme LED Pro kit. Keep in mind this will solve the flickering issue but because the LED bulbs can't dim then the lights will be on at full power.
Thanks for the awesome feedback and glad to see you are happy with the results.
Danny
Last edited:
XenonDepot
New member
AMEN to that!!
