bigslimdog
New member
Touch up paint. It's not a show car, it's a daily driver 4wd suv. Chips and dings suck at first but it's not a big deal. Builds character!
characted my azz, its a truck it can`t have character, fix it, try paintlesss repair first then small touchup can be done at any body shopcouple hundreds will get it done.
If you could post a pic, there may be a way to make it look better. I also recommend putting a little more distance between you and the vehicles in front of you.
Koz
I like 1engineer's "10 foot rule"
I had a similar experience with my truck except I took my dad out shooting in the desert and he was standing a weeee bit too close to the truck and ejected some .223 brass into my driver's side door. Put two little pock marks and chipped the paint. I was livid cause the truck was literally 1 month old. He paid for a paintless dent repair guyto fix the little dents and I got a bottle of the Toyota touch up paint and have never even thought about it since. Its not perfect and you can see em if you look close, but like others have said, your gonna get scratches, chips, etc. through the life of the truck, the first just hurts the worse.
To the OP - I would buy the OEM touch up paint, take your time and touch it up your best with a nice steady hand and let it harden up good ( a few days at least) . Take some 2000 and 4000 grit wet / dry sand paper and blend it in and buff it and wax it. From a couple feet you shouldnt be able to see it. Its worked for me multiple times!
I've never sand papered paint before is 2000 and 4000 grit real fine, I mean it won't scratch up the exsisting paint right?
Yeah, 2000 grit wet sandpaper is very fine, and 4000 grit feels like a sheet of printer paper. They will basically nock the rough edges off the touch up and make the paint look dull. On show cars detailers use 2000 grit to wet sand out the imperfections and "orange peel" in the clear coat of paint jobs. After you sand, take some good polishing compound and rub on it until you have your shine back and throw some wax on it. Should come out lookin good!