1st & 2nd gen 4-runner tech (factory service manual and common fixes)
- Thread starter SV_Dude
- Start date
timlyttle
New member
i did the link dont work anymore
Last edited:
timlyttle
New member
1990 4runner service manual. This is Book 1 when i get Book 2 and 3 ill put it on here too
http://www.rooney.org/tlc/manuals/90_VOL1.pdf
1990 4runner supplement manual
http://www.rooney.org/tlc/manuals/90_SUPP.pdf
http://www.rooney.org/tlc/manuals/90_VOL1.pdf
1990 4runner supplement manual
http://www.rooney.org/tlc/manuals/90_SUPP.pdf
Last edited:
Big bang and screeching metal on metal sound?
Big bang and screeching metal on metal sound?
I have a 94 4Runnner. Today O was urning around on a logging road in the Idaho wilderness. After backing up in a turn around I pulled forward intending to then back up. As I pulled forward a loud 'BANG' followed by screeching metal on metal.
The motor running fine, transmission working I backed up and drove back to camp about two miles. It did not overheat, oil pressure fine but the power steering was gone.
Got to camp looked under the hood to see the fan assembly separated from the motor. All the belts were in tact. What happened? Can anybody tell me what broke. Was it the bracket or something else.
Big bang and screeching metal on metal sound?
I have a 94 4Runnner. Today O was urning around on a logging road in the Idaho wilderness. After backing up in a turn around I pulled forward intending to then back up. As I pulled forward a loud 'BANG' followed by screeching metal on metal.
The motor running fine, transmission working I backed up and drove back to camp about two miles. It did not overheat, oil pressure fine but the power steering was gone.
Got to camp looked under the hood to see the fan assembly separated from the motor. All the belts were in tact. What happened? Can anybody tell me what broke. Was it the bracket or something else.
vijagamanios
New member
rupprechtp
New member
Eliminate turn signal in stock bumper
I'm bolting up a trail gear tube bumper to my 1984 Toyota 4Runner, my dilemma is that the stock bumper is equipped with turn signals and obviously the tube bumper is not. How can I eliminate those turn signals? I disconnected them and tried a jumper thinking that if I completed the circuit it would work but no luck. I've seen people mount those extra turn signals in their grill but I'd rather just eliminate them. Any advice would be greatly appreciated.
I'm bolting up a trail gear tube bumper to my 1984 Toyota 4Runner, my dilemma is that the stock bumper is equipped with turn signals and obviously the tube bumper is not. How can I eliminate those turn signals? I disconnected them and tried a jumper thinking that if I completed the circuit it would work but no luck. I've seen people mount those extra turn signals in their grill but I'd rather just eliminate them. Any advice would be greatly appreciated.
Sorry to hijack thread, but what the heck is this?
http://i84.photobucket.com/albums/k36/silbracing/IMG_0745_zpsa5vm6lle.jpg
http://i84.photobucket.com/albums/k36/silbracing/IMG_0745_zpsa5vm6lle.jpg
Kanjozokutsu
New member
Good info
KidVermicious
New member
There are two main companies that publish aftermarket repair manuals, at least here in the States, that's Chilton and Haynes. I don't know if either of them makes a manual for the turbo diesel though, they're both US companies and we didn't get the TD here.
Thanks. I ordered a Haynes manual. It has mixed reviews but I will give it a shot. I won't be touching anything engine related any time soon. If I need it I have the engine service manual as a PDF in my google drive.
cliffstain
New member
Hi all
Probably the wrong part of this forum to post for advice but im new to this site and useless with technology so bare with me! Just got a 1993 2.8l 4 runner, having a few issues, engine starts, idle moves from 500rpm to 1500rpm for a minute or so, chugs out a load of white smoke then cuts out.
Currently gravity feeding fuel past filter as I thought the fuel pump was knackered, (I now know there isnt a fuel pump in the tank). Truck has been sat for 5 years, oil and filters changed, how do i get the ****er to run?!
Cheers in advance!
Probably the wrong part of this forum to post for advice but im new to this site and useless with technology so bare with me! Just got a 1993 2.8l 4 runner, having a few issues, engine starts, idle moves from 500rpm to 1500rpm for a minute or so, chugs out a load of white smoke then cuts out.
Currently gravity feeding fuel past filter as I thought the fuel pump was knackered, (I now know there isnt a fuel pump in the tank). Truck has been sat for 5 years, oil and filters changed, how do i get the ****er to run?!
Cheers in advance!
Well, my 4runner needs a few things.
First and foremost, a water pump. I already have the part and I also have a timing belt. My coworker and I are planning to do it soon. We're also going to do cam seals and a timing seal. (Oil leaks)
It needs a power steering pump, a new exhaust system, and interior overhaul, a new shifter assembly, and CV boots. I imagine maybe a couple more minor suspension pieces, but the pitman arms look new, possibly some steering linkage.
Any good guides out there are appreciated, any good parts sources out there are also good.
I know about eBay, amazon, rockauto, and I downloaded the autozone app because it has repair guides for a lot of things, but some of them are very vague. My local auto parts store has a contract with the NTB I work at, so I get a parts discount. I'm not sure they carry everything I need though.
First and foremost, a water pump. I already have the part and I also have a timing belt. My coworker and I are planning to do it soon. We're also going to do cam seals and a timing seal. (Oil leaks)
It needs a power steering pump, a new exhaust system, and interior overhaul, a new shifter assembly, and CV boots. I imagine maybe a couple more minor suspension pieces, but the pitman arms look new, possibly some steering linkage.
Any good guides out there are appreciated, any good parts sources out there are also good.
I know about eBay, amazon, rockauto, and I downloaded the autozone app because it has repair guides for a lot of things, but some of them are very vague. My local auto parts store has a contract with the NTB I work at, so I get a parts discount. I'm not sure they carry everything I need though.
89FL4Runner
New member
Weatherstripping for Side Windows???
Hi, everyone. Does anyone know where I can purchase weatherstripping for the side sliding windows for the firstgen 4Runner?
I tried everywhere I can think of and its been discontinued. I'm restoring my 89 DLX and got all new weatherstripping for the front door windows, runs and weatherstripping for the doors.
Thanks so much!
Hi, everyone. Does anyone know where I can purchase weatherstripping for the side sliding windows for the firstgen 4Runner?
I tried everywhere I can think of and its been discontinued. I'm restoring my 89 DLX and got all new weatherstripping for the front door windows, runs and weatherstripping for the doors.
Thanks so much!
Attachments
Take a listen if you've got a sec..
After a great journey of putting in a new motor, a year later I now find myself with a problem. Any thoughts/suggestions would be greatly appreciated. Sorry the video was at night- had a friend over and was able to get close to the noise while he gave it a little gas. Hopefully the sound is noticeably to someone. Thanks again.
1995 3.0 V6.
https://www.youtube.com/watch?v=yaezfz4rTME
-JohnMark
After a great journey of putting in a new motor, a year later I now find myself with a problem. Any thoughts/suggestions would be greatly appreciated. Sorry the video was at night- had a friend over and was able to get close to the noise while he gave it a little gas. Hopefully the sound is noticeably to someone. Thanks again.
1995 3.0 V6.
https://www.youtube.com/watch?v=yaezfz4rTME
-JohnMark
thanks! very helpful info!
Similar threads
