5th Gen Wheel & Tire Thread

Wheel covers/Imposters

Anyone know where I can find black SR5 wheel covers/imposters? Recently purchased a 17' and came with black plastic wheel overs over the alloys. One came off and was run over. having a very difficult time finding a replacement.
 

Attachments

  • IMG_6297.jpg
    IMG_6297.jpg
    135.9 KB · Views: 5,296
Honestly I would just get em powder coated and not worry about a cheap hub cap.
But if you wanna stick with it I’d check eBay
 
SCS Stealth 6 17x8.5 on 285/70/17 Duratracs
Wheels: SCS Stealth 6 17x8.5 4.30BS -10 Offset
Tires: Goodyear Duratrac 285/70/17, D
Suspension: King 2.5" Extended Travel Coils with Remote Reservoirs
Body Mount Chop: None
Tire rub: Slight Rub on body mount in Reverse at full lock and moderate Rub with any Flex
Fenders: Trimmed about 1/2" on that bottom front lip
Mud flaps: Removed fronts


bigd91-albums-bigd91-picture53509-img-8979-2.jpg


bigd91-albums-bigd91-picture53511-img-8974.jpg
 
Last edited:
SCS Stealth 6 17x8.5 on 285/70/17 Duratracs
Wheels: SCS Stealth 6 17x8.5 4.30BS -10 Offset
Tires: Goodyear Duratrac 285/70/17, D
Suspension: King 2.5" Extended Travel Coils with Remote Reservoirs
Body Mount Chop: None
Tire rub: Slight Rub on body mount in Reverse at full lock and moderate Rub with any Flex
Fenders: Trimmed about 1/2" on that bottom front lip
Mud flaps: Removed fronts


bigd91-albums-bigd91-picture53509-img-8979-2.jpg


bigd91-albums-bigd91-picture53511-img-8974.jpg

Very nice! I had these on my 2012 Tacoma. Now I`m running the 17` SCS F5`s. I`ll post some pictures later on.
 
Can anyone tell me what tire size this rig has? Found the pic online and fell in love! Exactly the look I’m going for. I don’t know who’s this is, so if you see me driving around in a 4Runner looking exactly like yours, please take it as a compliment that you built my idea of the perfect Runner!...

What CB antennae mount is that??
 
Wheel: KMC XD 131. 17x8. 0 offset, 4.5 backspace.
Tires: BF Goodrich T/A KO2. 265/70/17, E.
Suspension: Bilstein 5100 shock at all four corners. Front shocks set at 0.85.
Body Mount Chop: No.
Tires Rub: Tires rub front fenders close to full lock in reverse.
 

Attachments

  • 20190106_150203938_iOS.jpg
    20190106_150203938_iOS.jpg
    77.7 KB · Views: 5,860
  • 20190103_171039321_iOS (2).jpg
    20190103_171039321_iOS (2).jpg
    138.6 KB · Views: 5,054
- OEM Lexus GX460 F Sport PTR5660120 - 18x7.5 - Almost 5" Backspace - 20mm Offset - No Spacers
- Toyo Open Country A/T2 275/65/18
- Bilstein up front at 1.75" IIRC - Dobinsons rear springs (can't recall which model right now)
- Body mount chop - No
- Do your tires rub - No; I obviously didn't go big enough.
 

Attachments

  • t4r.jpg
    t4r.jpg
    138 KB · Views: 5,537
Last edited:
Wheel: KMC XD 131. 17x8. 0 offset, 4.5 backspace.
Tires: BF Goodrich T/A KO2. 265/70/17, E.
Suspension: Bilstein 5100 shock at all four corners. Front shocks set at 0.85.
Body Mount Chop: No.
Tires Rub: Tires rub front fenders close to full lock in reverse.

Maan!,
I really like the white out lettering with black wheels on the magnetic grey. Looks sick. Traded in my 13 LE for a 19 ORP in mag.grey and this is the look I want. Good Job picking the white letters over black
 
Falken Wildpeak A/T3W LT285/70R17
Mamba Offroad M23's -12 Offest 4.53 Backspacing
3" BDS Suspension

I have a little bit of rubbing at full steering lock but will just need to trim the very bottom of the inner fender. I also took the front mud flaps off. Other than that I love the setup. No serious trimming needed and the Falkens have been great on and off road so far.
 

Attachments

  • 4.jpg
    4.jpg
    58 KB · Views: 4,533
  • 3.jpg
    3.jpg
    140.8 KB · Views: 4,563
  • 2.jpg
    2.jpg
    112.9 KB · Views: 4,515
  • 1.jpg
    1.jpg
    114.8 KB · Views: 4,522
  • 5.jpg
    5.jpg
    87.4 KB · Views: 4,927
Falken Wildpeak A/T3W LT285/70R17
Mamba Offroad M23's -12 Offest 4.53 Backspacing
3" BDS Suspension

I have a little bit of rubbing at full steering lock but will just need to trim the very bottom of the inner fender. I also took the front mud flaps off. Other than that I love the setup. No serious trimming needed and the Falkens have been great on and off road so far.

Have any more pics of those sliders? They look to be able to be used as step
 
not really right thread for this but [MENTION=313761]victoryrunner[/MENTION] looking at the pic i don't think the sliders are designed exactly right. someone maybe [MENTION=118321]Jetboy[/MENTION] ? posted some good info recently about slider design that i hadn't considered before.

i believe the gist of it was, the main inner square tube should sit under the pinch weld running along the underside of the rocker. when the weight of the vehicle is dropped on the slider and it flexes it will disperse the force along the length of the body rather than in 2 localized spots where the support arms contact the pinch weld.
 
not really right thread for this but [MENTION=313761]victoryrunner[/MENTION] looking at the pic i don't think the sliders are designed exactly right. someone maybe [MENTION=118321]Jetboy[/MENTION] ? posted some good info recently about slider design that i hadn't considered before.

i believe the gist of it was, the main inner square tube should sit under the pinch weld running along the underside of the rocker. when the weight of the vehicle is dropped on the slider and it flexes it will disperse the force along the length of the body rather than in 2 localized spots where the support arms contact the pinch weld.

Sorry if that picture wasn't clear. Here are some more photos.
They don't touch the pinch weld. They are frame mounted and have 3/4" gap between the slider and the pinch weld to allow for some flex on a full weight drop. They should never contact the pinch weld.

Victory 4x4 is a sister company to JcrOffroad who has been making Jeep armor for 15+ years.

Let me know if you have any more questions about them.
 

Attachments

  • IMG_9296.jpg
    IMG_9296.jpg
    72.8 KB · Views: 4,548
  • IMG_9305.jpg
    IMG_9305.jpg
    54.7 KB · Views: 4,506
  • IMG_9312.jpg
    IMG_9312.jpg
    31.6 KB · Views: 4,487
VenomRex Wheels

Does anyone know anything about/have the VenomRex VR-602 wheels? I love the look but can't seem to find much info about them on the forums.
Even the greater internet is only really talking about the wheels on Raptors and trucks even though the VenomRex product page says they will fit 4Rs and Tacomas.
 
5th Gen Tire Recommendations

All, First time 4Runner owner. It is time to put some new tires on my 16 4Runner. I want to put bigger/AT tires on it. What do you all recommend. Stock tires on now with 20" rims. I plan to at least level it in the future just not ready to do that. Going to put some new rims as well but haven't found what I am looking for.

So looking for feedback from the group.

Thanks in advance.
 

Members online

No members online now.

Forum statistics

Threads
278,310
Messages
3,554,079
Members
248,016
Latest member
Advally Service

Trending content

Back
Top