Another Cornfed 3/2 installed! :)

[97hb]

Just installed my cornfed 3/2 from Jason. Couldn't get more pics as the camera died before I could even start the back. :50cal: Things I did that helped the install were remove front sway bar completely and disconnect the two front steering tierods. Front coilovers came out easily with help from brother stepping on front rotor to make lca lower enough to slide the coilover right out. Back all I did was unbolt swaybar from frame and left it bolted to the rear diff housing. Install took about 4 hours with help from brother. I would recommend a second person for sure, made the job very easy. I would also get 17mm and 19mm deep sockets. Still on some 265's but ordering some 285's should be here by the end of this week. Thanks to Jason for a awesome product, fit perfectly. And my brother for sitting in the hot texas heat in a garage for 4 hours. I heart my 4runner.

 

[CJ3Flyr]

Looks great! The dark blue looks great, just need some 255/75/17 BFG M/T's

If you get a chance put the pics and a quick description here too, thanks. http://www.toyota-4runner.org/showthread.php?t=51742
:cheers:

 

[Jason B]

Just installed my cornfed 3/2 from Jason. Couldn't get more pics as the camera died before I could even start the back. :50cal: Things I did that helped the install were remove front sway bar completely and disconnect the two front steering tierods. Front coilovers came out easily with help from brother stepping on front rotor to make lca lower enough to slide the coilover right out. Back all I did was unbolt swaybar from frame and left it bolted to the rear diff housing. Install took about 4 hours with help from brother. I would recommend a second person for sure, made the job very easy. I would also get 17mm and 19mm deep sockets. Still on some 265's but ordering some 285's should be here by the end of this week. Thanks to Jason for a awesome product, fit perfectly. And my brother for sitting in the hot texas heat in a garage for 4 hours. I heart my 4runner.

Great pics and glad you like it! These are in stock as we speak.

http://www.burtmanindustries.com/zoomprod.php?id=4run_03_up_liftkit

 

[97hb]

Looks great! The dark blue looks great, just need some 255/75/17 BFG M/T's

Thanks man, i just ordered some of them 255's Wish I would have last week they were $15 cheaper a tire. I wouldn't even have looked at these till you said something, thanks.

Great pics and glad you like it! These are in stock as we speak.

Thanks Jason, spacer kit fit perfect.

 

[YOLO]

Nice. I am installing my Daystar 2.5/1.5 tomorrow. I cant wait! :guitar3:

 

[97hb]

Nice. I am installing my Daystar 2.5/1.5 tomorrow. I cant wait! :guitar3:

Did you get it installed? Here are some 255/75/17 pics. They cut right though the mud, no sliding around like on street tires. They are awesome.

 

[04runnerSR5]

i was wondering if you have any rubbing?