Bare with me...please, but really

JohnBill53

New member
My mother always used to talk to me about instant gratification yadda yadda. Well these days I blame it on the inability to find a job during my 4 weeks off from school, and how bad I desperately want to work on the 4runner. So up comes the question again...My brother drives an 85 LC and talking to him over the holidays we came up with what my mom would call a "Billingsley" solution. I've wanted to throw a body lift on the rig forever, me and my brother came up with this and I'd like some feed back...

We came up with the idea of taking 1 inch cutting board material and cutting the necessary 10 pucks to use for a body lift.

Mind you, I do primarily most of the work on my 4runner I'm just seeking some more experienced people, so what do y'all think, yay or nay?
 
Register to hide this ad
NOOOOOOOOO!!!!!

DO NOT DO THAT!!!! WORST IDEA EVER!!!

Listen, and listen carefully, please, for the love of all things that you beleive in.

A Body Lift, much like a suspension lift, needs to be done CORRECTLY.

While whats his name said body lifts "are dangerous", he's mostly full of crap, but he has a good point.

Body lifts ARE dangerous if they are NOT done correctly. You can run into probelms from putting a hole through your body, to breaking the mount off.

This all comes from the material that is being used. People Have used PVC tubes filled with cement, rubber, or any other compound and have roaylly f*cked the body or mounts up, because the material they used isn't big enough, or transfers too much vibration, inturn causing failures to the body mounting locations.

Please man. I know you want to work on the Runner, but DO NOT take shortcuts when it comes to ANY kind of lift, Body or Suspension. Do it right the first time, and make it last a long time.

Look into 4Crawler for body lifts.

If you're dead set on doing something to the runner, do the full time power out let mod, do something else to mod it.

DO NOT do anything like making your own body lift or something along those lines.
 
People have done worse things than make body lifts out of UHMW....Really, what is a body lift, a hard plastic spacer, nothing more. ;)

At least he's not trying to stack 3 of them to make a 3" lift...lol. You're not are you?
 
[MENTION=76419]Doc2012[/MENTION], most of the time, is a quiet poster... He gives solid advice but in a quiet manner... So the fact that he's using all caps and lots of exclamation points really, really shows that he's trying to get a point across...

Doc also knows his stuff, so I would pay attention if I were you.

And even to a non suspension/body lift guy, cutting board material sounds like a bad idea, frankly.
 
More than embarrassed with the replies... how ever I'm glad i sought some feedback in my idea for a seemingly jimmy rigged body lift

In other news I plan on running by a couple of junk yards this week/ weekend to try to find some Tundra TRD coils seeing as to how mine are shot (after 210K you'd think so) as well as some tubing so I can head down to Tyler, Texas this weekend to see a fraternity brother who is a professional DIY kid and a very good welder.
 
More than embarrassed with the replies... how ever I'm glad i sought some feedback in my idea for a seemingly jimmy rigged body lift

In other news I plan on running by a couple of junk yards this week/ weekend to try to find some Tundra TRD coils seeing as to how mine are shot (after 210K you'd think so) as well as some tubing so I can head down to Tyler, Texas this weekend to see a fraternity brother who is a professional DIY kid and a very good welder.


There is ABSOLUTELY no reason to be embarrassed with anything man.

You asked a question.

The reason I responded the way I did is becasue I've SEEN what happens when someone tries to make a body lift, but has no idea what they're doing while trying to accomplish the task.

I've had a buddy almost loose his fingers because the block he was using broke and the body slammed down. The only thing that saved his fingers and hand was that I put the jack up as high as it would go, and the body hit that and rested on it. He had less than an 1/8 of an inch between his hand and the body of the Runner.

I've had some close calls in Afghanistan, but, that deffinately puckered up my butthole.

I've also seen people brag about the lift they made, only to get into the truck and find out the door doesn't shut right because the body lift broke and is tweaking the body so it doesn't line up right, and the truck tilts while driving down the road.

Anyway... Back on topic.

I, along with anyone else on this forum, would rather you ask a question, then not ask one. You remember what your teachers use to say?

"The only dumb question is the one you don't ask."

That's exactly right. There is a reason all of us are here.

Weather you think a question is stupid or not, ask it anyway.

Would you rather get the little bit of "embarrassed" feeling, or so something that is going to either kill you or ruin your truck.

Hey, at least we're not like the asses over on TTORA who think they're god's gift to anyone Toyota and will flame you for anything.

(I know there's TTORA members here; I, myself, am one of them. But this site is A LOT better at helping people out than TTORA is. I mean no ill will toward anyone on TTORA, nor the vast amount of knoweldge there is on that site. I just feel that it can be portrayed in a different way then the majority of the members over there do it.)
 
It's much appropriated without a doubt. If it's any consolation I'm a 20 year old kid, I've worked since I was 15 years old and now that I'm in college I don't have the time to work, and it KILLS me to halt work on my baby.
 
It's much appropriated without a doubt. If it's any consolation I'm a 20 year old kid, I've worked since I was 15 years old and now that I'm in college I don't have the time to work, and it KILLS me to halt work on my baby.

Trust me man. I know the feeling.

I use to get out of work and go to town on mine. I use to have every weekend to do it.

Now, I'm stationed at the Naval Hospital, working 12 hour night shift in the ICU. 3 on, 2 off, 2 on, 3 off type BS.

It blows. I start something, then I need to go to sleep so I can work. Then when I get home, I sleep all day and can't get anything done.

There is a time and place for it all man. Weather you need to stop working on her to save up some money, or you just don't have the time to do it.

But, like I said before: If you want to do something, do it RIGHT the first time. That way there's no second guessing your self about the decisions you've made.

Of course, that doesn't work with custom stuff. Ask me how I know.....:bash:
 
On that note I mentioned the tube bumper, keeping in mind free labor, do you have any idea how much it would cost for a simple front tube bumper, similar to the addicted off road bumper with no pre runner hoop? if I buy the the tubing new, or used, do you have any Idea what'd it cost?
 
Ironically enough, yours truly turned down more than one division one hockey scholarships to go to school with the now ex girlfriend in the GREAT state of Oklahoma:redbrick:
 
I agree, better to ask the question... also, I think it's awesome that you're willing to accept the advice, for whatever it's worth, and be humble about it, instead of getting all flamed up and such... I admire that, cheers man! :)

Welcome to T4R.org and we're glad to have you! I know this place and these people have been quite patient with me as well, I don't know a whole lot!
 
Ironically enough, yours truly turned down more than one division one hockey scholarships to go to school with the now ex girlfriend in the GREAT state of Oklahoma:redbrick:

Noooooo!!!! :moony: LOL that sucks!!! Man I played hockey for 8 years I miss it so much.:violin:
 
How much is your time worth? Tubing isn't really all that expensive. I could quote you some online stuff but shipping would kill you. Go to a local steel yard or metal supply. I know there are some in northeastern OK as I live in Bartlesville, so I imagine there would be some near Norman.

I feel you on this "great" state. I love it to death but there just isn't all that much here. Thus why I went to Colorado for college. Coincidentally I also have plenty of ex's in Norman......watch out!:ballchain:
 
I'm more interested in pricing on just the tubing no matter where it is especially in Oklahoma... I just need some numbers to figure out how much i need to plan to try and make...
 

Members online

Forum statistics

Threads
278,309
Messages
3,554,071
Members
248,016
Latest member
Advally Service

Trending content

Back
Top