Compiled: FJ Springs Lift Info for 4th gen
- Thread starter Toy4R4Me
- Start date
danronian
New member
Front 5100s set to 1.75 with Moog springs front and rear. 4wd FJ Moog in the front and 81045 Moog in the rear (oe replacement for the 4Runner) to pair with the rear 5100s. Added 1.5” daystar spacers in the rear to level it out. Ended up with a one inch rake when measured at the wheel wells. It rides great on the 265 70 17s on 2016 SR5 wheels. It aligned ok.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Looks great. How's your alignment specs? Stock UCA?
Sent from my SM-G930V using Tapatalk
Run4Evr
New member
did u set it up with no spacers? i want to do this with 1.75 without a rear spacer.
It rides great! I definitely feel the difference sitting about 3” higher up! I went to get an alignment as soon as I finished up the job. It has stock UCA
Yes I used 1.5” rear spacer in the install
Run4Evr
New member
sweet, what tire size are those.
It’s the stock 265. I’m looking into some all terrain tires but still haven’t made up my mind on the tire size. 285’s would look very nice on it but it’s my daily driver so the mpg will take a hit
snowman340
New member
Some good info
impervious17
New member
What size spacer would you guys recommend for 16 stock wheels with the blisten 1500 and moog fj springs? I plan on doing a 1.75 lift in the front.
danronian
New member
haydenbrown77
New member
has anyone done a full FJ Suspension swap?
I am in the process of doing full FJ TRD bilsteins onto my T4R and would like some helP!
I am in the process of doing full FJ TRD bilsteins onto my T4R and would like some helP!
OVERLAND-4thGEN
New member
I have a 04 with 2012 FJ springs, Bilstein 5100 and 1 inch spacer. Where should I put the spring perch adjustment on the 5100? Theres 4 adjustment, and want a comfort ride with a decent lift. Any suggestion would be great thanks.
schmauster
New member
Running stockish for now 
Jasonredwood
Member
A friend of mine just upgraded his 2013 FJ's suspension and offered me his coils and shocks. Am I right in thinking that the coils will work for my 2006 V8 4runner. I just need to get the adjustable 5100 billstiens. It sounds like the coil fitment issues is with only the moog coils on occasion, or am I wrong. Just looking for clarity here.
Thanks T4r!
Thanks T4r!
Jason,
You are correct, they will fit your rig. Just make sure they are the 4x4 FJ Cruiser springs (I assume your friend's FJ is a 4x4) to fit your 4x4 4runner. Also, make sure you keep track of the front driver side spring, it is sprung slightly more than the passenger side front, so you will want to put them on the correct side. I have the moog springs and they do not slot perfectly into their bottom mounts, you are correct, but it doesn't bother me (it does bother some, understandable) and it has not affected performance at all, on road or off. You won't have that problem, if it is a problem, with the FJ oem springs.
rugger
Jasonredwood
Member
Thank you!
Do you know what model FJ your Springs came off of? This is pretty much the exact setup i'm looking for so i can run 275/70r17 ko2's as well
Similar threads
