Custom Trail Emblem Made

I would be willing to Cerakote a couple of these emblems to try it out.

For those that are not familiar with Cerakote, it is a ceramic based heat cured coating that is used on firearms. But it also has many other applications. Basically, you can cerakote anything that is metal, polymer and even wood.

Comes in just about every color.

I don't work for Cerakote or anything. Just do gun refinishing on the side.

You can check out my work on my FB page:https://www.facebook.com/amendment2customcoating?ref=hl
 
jrandom said:
Jones'd on it a bit, so I stuck it on to test it out. I still have another coat of dip to do...then spend another month on placement :biggrin1:
Click to expand...

looks good! i personally like them higher and noticed that Toyota actually puts the TRD PRO higher on that pillar.
 
Mine arrived today . They were broken ..... Nothing a little glue can't fix .

I would suggest taping them on a sheet of cardboard .
 
On Point said:
looks good! i personally like them higher and noticed that Toyota actually puts the TRD PRO higher on that pillar.
Click to expand...

Thanks, I agree on the placement :) I haven't stuck them on yet. Just wanted to check it out. I still have to finish the dip, wash, wax and seal first.

sbk12rs said:
Mine arrived today . They were broken ..... Nothing a little glue can't fix .

I would suggest taping them on a sheet of cardboard .
Click to expand...

Did you get them from Shapeways? (the link in my sig) If so I would suggest getting in contact with them. All of the ones I have ordered have been very well packaged.
 
Last edited:
Thanks for the great work. I have been looking for this for a while for my 11 TE. considering to order the BLACK METAL version or the Solid Black plastic version. What is the difference between the two? Would the metal version not have the lines like the plastic version? Would it over all look better? please let know if you have pictures side by side or if anyone has put the metal version on their truck. thanks
 
Just got mine in!

What are you guys using to stick these to the truck? I assume double sided tape but is there a preferred one that holds up to the elements better?

And, are you cutting the tape with an exacto knife or something similar?
 
3M double sided automotive tape seems to be the way to go. It apparently is what manufacturers use for badges. I bought a roll off Amazon for fairly cheap and cut out individual strips to follow the lines of the back side of the emblem. I'm about three weeks, two blizzards and four car washes in and they haven't moved at all.
 
SlugInfinite said:
3M double sided automotive tape seems to be the way to go. It apparently is what manufacturers use for badges. I bought a roll off Amazon for fairly cheap and cut out individual strips to follow the lines of the back side of the emblem. I'm about three weeks, two blizzards and four car washes in and they haven't moved at all.
Click to expand...
Perfect, thank you very much!
 
nevetsvsx said:
Just got mine in!

What are you guys using to stick these to the truck? I assume double sided tape but is there a preferred one that holds up to the elements better?

And, are you cutting the tape with an exacto knife or something similar?
Click to expand...

Yes and yes :)
 
niadh0 said:
Thanks for the great work. I have been looking for this for a while for my 11 TE. considering to order the BLACK METAL version or the Solid Black plastic version. What is the difference between the two? Would the metal version not have the lines like the plastic version? Would it over all look better? please let know if you have pictures side by side or if anyone has put the metal version on their truck. thanks
Click to expand...

I am not sure how the metal version would come out. For the price I would hope that they would smooth it out. You should call or contact them before you order one. That would be my advice. Maybe I should have tacked a dollar or two on to all of the prints I have sold (all the prices are cost) and used that to try out some test prints of the metal materials.

As for the strong and flexible plastics they come out real nice IMO there is some very minor stepping (you can't really even feel it), a few coats of plast-dip covers them well. I imagine a few decent coats of quality rattle-can would cover too.
 
Last edited:
SlugInfinite said:
3M double sided automotive tape seems to be the way to go. It apparently is what manufacturers use for badges. I bought a roll off Amazon for fairly cheap and cut out individual strips to follow the lines of the back side of the emblem. I'm about three weeks, two blizzards and four car washes in and they haven't moved at all.
Click to expand...

What size tape did u get??? Part no. If possible!! TIA!
 
Interesting that a few weeks ago, I spotted a grey trail in Tysons Corner, and it had a chrome "trail" on it, and it was not the design being shown here, it was more normal letters.
 
4FL said:
Interesting that a few weeks ago, I spotted a grey trail in Tysons Corner, and it had a chrome "trail" on it, and it was not the design being shown here, it was more normal letters.
Click to expand...

It is more than likely a "name your toyota" badge. Did it look like this?
 

Attachments

  • home_hero.jpg
    home_hero.jpg
    69 KB · Views: 1,254
Yes, the letters were plain like that, no fancy font or anything. It was where "SR5" or "Limited" would be.

I never heard of the "name your Toyota" thing.
 
I saw an Acura today that cut me off and then got stopped at the light in front of me.

It had the requisite ghetto quality sub-woofers shaking the trunk lid, and no less than 5 additional badges on the trunk. Unfortunately I did not have my camera so no pic.

However from left to right it had:

1) Turbo 2) Limited 3) 3.2 Turbo 24V 4) Acura X 5) Neuspeed

Oh yeah, the factory alloys had a shake and shoot black enhanced by orange highlights on the inside of the spokes.

Classy. :-)
 
Material

Are these only available in metal? I would prefer to stick something along the lines of a plastic (3D Printing material) or even a vinyl sticker on the car. If anyone has any info please let me know!!

thx....

Zach
 
You must log in or register to reply here.

Members online

Total: 369 (members: 5, guests: 364)

Forum statistics

Threads
278,310
Messages
3,554,079
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top