1 1bzdvl Member Nov 25, 2024 #21 phattyduck said: The 93C56 and 93C46 are both EEPROMs, so no help there. The 10358 *might* be a dual opamp, I'd have to check pinout... I was hoping only one of them would be an EEPROM... Since you have to guess here, I'd go with the one closest to the IC driving the ODO LCD... -Charlie Click to expand... That was the correct chip! Thank you! Now I have to find out what else could be causing my p0500 issue.
phattyduck said: The 93C56 and 93C46 are both EEPROMs, so no help there. The 10358 *might* be a dual opamp, I'd have to check pinout... I was hoping only one of them would be an EEPROM... Since you have to guess here, I'd go with the one closest to the IC driving the ODO LCD... -Charlie Click to expand... That was the correct chip! Thank you! Now I have to find out what else could be causing my p0500 issue.
1 1bzdvl Member Apr 22, 2025 #22 phattyduck said: The 93C56 and 93C46 are both EEPROMs, so no help there. The 10358 *might* be a dual opamp, I'd have to check pinout... I was hoping only one of them would be an EEPROM... Since you have to guess here, I'd go with the one closest to the IC driving the ODO LCD... -Charlie Click to expand... You don't happen to have the schematic for the circuit boards for a 2000 3.4 manual combination meter? Thank you again.
phattyduck said: The 93C56 and 93C46 are both EEPROMs, so no help there. The 10358 *might* be a dual opamp, I'd have to check pinout... I was hoping only one of them would be an EEPROM... Since you have to guess here, I'd go with the one closest to the IC driving the ODO LCD... -Charlie Click to expand... You don't happen to have the schematic for the circuit boards for a 2000 3.4 manual combination meter? Thank you again.
P phattyduck Elite Member Apr 22, 2025 #23 1bzdvl said: You don't happen to have the schematic for the circuit boards for a 2000 3.4 manual combination meter? Thank you again. Click to expand... I think only Denso would have that... And they won't be sharing it. -Charlie
1bzdvl said: You don't happen to have the schematic for the circuit boards for a 2000 3.4 manual combination meter? Thank you again. Click to expand... I think only Denso would have that... And they won't be sharing it. -Charlie
1 1bzdvl Member Apr 23, 2025 #24 phattyduck said: I think only Denso would have that... And they won't be sharing it. -Charlie Click to expand... Bummer... Thank you again Charlie
phattyduck said: I think only Denso would have that... And they won't be sharing it. -Charlie Click to expand... Bummer... Thank you again Charlie
