EL002R-03 07/29/2003 Instruments - Maintenance Reminder Light Resetting

[CBR_GUY_IA]

ELECTRICAL
EL002-03
REVISED

March 7, 2003

Title:
SERVICE MAINTENANCE REMINDER LIGHT RESET PROCEDURE

Models:
'03 4Runner & Land Cruiser, '04 Sienna

TSB REVISION NOTICE :July 29, 2003: Applicable models now includes 2004 Sienna.

Introduction

The 2003 model year 4Runner and Land Cruiser, and 2004 model year Sienna vehicles are equipped with a Service Maintenance Reminder Light. The following procedure should be used to reset the light when the oil has been changed.

Applicable Vehicles

^ 2003 model year 4Runner and Land Cruiser vehicles.

^ 2004 model year Sienna vehicles.


Reset Procedure

To reset the Service Maintenance Reminder Light:

1. Turn the ignition switch to the "ON" position.

2. Set the Odometer / Trip Display to the "ODO" mode.

3. Turn the ignition switch to the "OFF" position.

4. Depress and hold the Trip Meter "RESET" button while turning the ignition switch to the "ON" position.

5. The Service Maintenance Reminder Light will:

a. Illuminate solidly for 3 seconds.

b. Blink for 2 seconds.

c. Illuminate solidly for 1 second.

d. Turn off.


6. Release the Trip Meter "RESET" button.

7. Turn the ignition to the "OFF" position.

8. Turn the ignition to the "ON" position, and confirm that the Service Maintenance Reminder Light goes out.

NOTE: If the light continues blinking in step 5a, turn the ignition off, and repeat the procedure from step 1.








Warranty Information