g3ran3t's build thread
- Thread starter g3ran3t
- Start date
g3ran3t
New member
Radflo 2.5's with Resis
Here is what I ended up going with. Steve from Sonoran Steel was super helpful. These pictures are actually still with my old setup on it, just after a detail after Burning Man, but I will get some shots of what it looks like and some better pictures of the Radflo's soon! They are awesome!!
Here is what I ended up going with. Steve from Sonoran Steel was super helpful. These pictures are actually still with my old setup on it, just after a detail after Burning Man, but I will get some shots of what it looks like and some better pictures of the Radflo's soon! They are awesome!!
Attachments
g3ran3t
New member
Radflo 2.5's with Resis
Here are a few shots I snapped of my new Radflo 2.5's with Resis with Total Chaos UCA's. Land Cruiser coils, panhard bar, and new bumpstops from Steve at Sonoran Steel. I am so excited to finally have the right setup on my 4runner all dialed in!
Here are a few shots I snapped of my new Radflo 2.5's with Resis with Total Chaos UCA's. Land Cruiser coils, panhard bar, and new bumpstops from Steve at Sonoran Steel. I am so excited to finally have the right setup on my 4runner all dialed in!
Attachments
g3ran3t
New member
Dual Battery Setup
I also did a dual battery setup which I LOVE! I have an Optima Red Top as my starter battery and an Optima Yellow Top as my auxilary battery. I can keep them separated for when I use my ARB fridge (which I will post pictures, even though at the moment I am not using it), or I can connect them together for charging and extra battery power.
I also did a dual battery setup which I LOVE! I have an Optima Red Top as my starter battery and an Optima Yellow Top as my auxilary battery. I can keep them separated for when I use my ARB fridge (which I will post pictures, even though at the moment I am not using it), or I can connect them together for charging and extra battery power.
Attachments
g3ran3t
New member
ARB Fridge
So at the moment I actually don't have this thing in my truck but I did purchase an ARB fridge with slide that is connected to my auxiliary battery as well as a roof top tent for when I want to go camping without my trailer. Here is how I have it setup when I use it.
So at the moment I actually don't have this thing in my truck but I did purchase an ARB fridge with slide that is connected to my auxiliary battery as well as a roof top tent for when I want to go camping without my trailer. Here is how I have it setup when I use it.
Attachments
DeKalbOffroad
New member
Hello!
Man what a great build thank you for sharing it with us! My question is could you give a rough estimate of what your full Radflo set up cost? I love it and have heard good things about them. Thank you for your time!
Man what a great build thank you for sharing it with us! My question is could you give a rough estimate of what your full Radflo set up cost? I love it and have heard good things about them. Thank you for your time!
g3ran3t
New member
Fourtreks Hi-Lift Mounts
They are made by Fourtreks.
Here is the link to where I bought them. They are expensive but, man, are they nice.
http://fourtreks.com/hi_lift_roll_bar_mounts_1_75_.html
They are made by Fourtreks.
Here is the link to where I bought them. They are expensive but, man, are they nice.
http://fourtreks.com/hi_lift_roll_bar_mounts_1_75_.html
g3ran3t
New member
Radflo
Sorry I barely respond on here. Here is the email that I got from Steve at Sonoran Steel. He is really the guy to talk to if you have any questions and he is super helpful. It was $2,500 for the kit and then on top of that he responded with
"""Grant-
Sales Tax to California will be $125.71. The shipping for the 4 shocks will be $46.00
There is no tax from in Arizona. The shipping for the rest of the kit from AZ will be around 45.
I will bill you actual cost, put dimension and weight ion UPS and they spit out a number, we don't mark it up.""""
I also bought Total Chaos UCA's that you def need which was about another $700 more.
Hope this helps and btw, Steve's Radflo setup is F***IN DOPE!
Sorry I barely respond on here. Here is the email that I got from Steve at Sonoran Steel. He is really the guy to talk to if you have any questions and he is super helpful. It was $2,500 for the kit and then on top of that he responded with
"""Grant-
Sales Tax to California will be $125.71. The shipping for the 4 shocks will be $46.00
There is no tax from in Arizona. The shipping for the rest of the kit from AZ will be around 45.
I will bill you actual cost, put dimension and weight ion UPS and they spit out a number, we don't mark it up.""""
I also bought Total Chaos UCA's that you def need which was about another $700 more.
Hope this helps and btw, Steve's Radflo setup is F***IN DOPE!
infamousRNR
Senior Member
did you line-x the rack and rear hatch fairing?.....
or powder coat or spray on bed liner??
g3ran3t
New member
It's a crackle texture powder coat. If I was going to do it again I would do it with line-x. The powder coat is not as strong.
infamousRNR
Senior Member
Line-x is so expensive. Some shop quoted me $600 ($300 each slider) and they also said they won't warranty it ....
How much was all your powder coating?
How much was all your powder coating?
g3ran3t
New member
For sale
I have been toying around with the idea of selling my 4runner. This is something that I literally told myself I would never do, but I am thinking it is time to sell my it, sell my Infiniti G37, and mayyyyyybe buy a brand new 2016 Tacoma. This is honestly me just kind of toying around with the idea right now, but I figured this would be the only place to sell my rig and actually have it go to a good home who appreciates what has been done to it.
If you go to the first page of my build thread, you can see everything that I have done and the full build thread. All of the stuff that is shifted over to the right is probably stuff I will keep. The other modifications are things that are staying. It has 175,000 miles on it, and I also literally just replaced the CV's as well as every single front suspension piece when I upgraded to my Radflo's in January. The front end is literally brand new other than the lower control arms. The whole truck is literally in perfect condition other than a few minor scratches on the exterior. Drives and runs perfect!
I have been toying around with the idea of selling my 4runner. This is something that I literally told myself I would never do, but I am thinking it is time to sell my it, sell my Infiniti G37, and mayyyyyybe buy a brand new 2016 Tacoma. This is honestly me just kind of toying around with the idea right now, but I figured this would be the only place to sell my rig and actually have it go to a good home who appreciates what has been done to it.
If you go to the first page of my build thread, you can see everything that I have done and the full build thread. All of the stuff that is shifted over to the right is probably stuff I will keep. The other modifications are things that are staying. It has 175,000 miles on it, and I also literally just replaced the CV's as well as every single front suspension piece when I upgraded to my Radflo's in January. The front end is literally brand new other than the lower control arms. The whole truck is literally in perfect condition other than a few minor scratches on the exterior. Drives and runs perfect!
Last edited:
4Running Daily
New member
How close to asking price did you get?
