Hard to find Specs, Info & Measurements on 231mm 13WL Tundra Calipers & Rotors

[WA2000]

Just bought my 2000 T4R. Excited to do this upgrade. Will update with photos!

Only question I have,
When buying the remaned 13WL I realized it does not come with all hardware. (Mounting bolts especially)
I am worried that my current caliper mounting bolts will come up too short. Will my current mounting bolts be long enough to handle the new width of the 13WL, or do I need to get new mounting bolts for the 13WL?

Thanks guys! Great reviews and write ups. Partly the reason I purchased a 4runner finally!

 

[Twan]

Just bought my 2000 T4R. Excited to do this upgrade. Will update with photos!

Only question I have,
When buying the remaned 13WL I realized it does not come with all hardware. (Mounting bolts especially)
I am worried that my current caliper mounting bolts will come up too short. Will my current mounting bolts be long enough to handle the new width of the 13WL, or do I need to get new mounting bolts for the 13WL?

Thanks guys! Great reviews and write ups. Partly the reason I purchased a 4runner finally!

I reused the factory bolts with no issues.

 

[RedbeardPete]

Factory bolts, been going just fine for 2 years

 

[Cburson]

16” trd fj Baja bead style wheels

Wondering if anyone has fit the 16” trd fj Baja beadstyle wheel over the 231mm???

 

[Cburson]

Anyone know is the 16” trd fj Baja beadstyle will fit over the 231mm??

 

[kolelt]

How come the 13WL calipers are less expensive then the smaller ones in Napa ?

 

[CESwartz07]

TBU with Powerstop calibers, rotors, and pads, and Stoptech 4Runner stainless lines


Sent from my iPhone using Tapatalk

 

[Road Bull]

231s with SCS F5s pics of clearance.

 

[AZBub]

TBU with Powerstop calibers, rotors, and pads, and Stoptech 4Runner stainless lines


Sent from my iPhone using Tapatalk

How do you like it? I’ve heard the calipers from the kit are 50/50 with leaking right out of the box.


Sent from my iPhone using Tapatalk

 

[CESwartz07]

How do you like it? I’ve heard the calipers from the kit are 50/50 with leaking right out of the box.


Sent from my iPhone using Tapatalk

They are fine so far. They are probably just rebuilt and powder coated cores


Sent from my iPhone using Tapatalk

 

[curryT4R]

This is going to be my next upgrade but I'm scared that they won't fit with my wheels! Does anyone know if they will fit in American Racing AR23 16x8 +0 ???

 

[Stocktc1]

advance auto parts

Is this the correct tundra caliper parts for the 3rd gen? Just checking. advance auto spits out a lot of different results.

http://www.toyota-4runner.org/3rd-g...rand-brake-parts-tbu-advanced-auto-parts.html

 

[poleclimber63]

rim question

I still have a steel spare years after doing the 231mm upgrade. I had a flat this Summer, luckily on the rear. However, I have now come across an opportunity to replace this spare with a 4th gen rim with a 265 65 17 mounted. Will this rim fit on my 3rd gen 4R?

I run LTD 16" rims in the Summer with 265 70 16 all seasons and Sequoia 17" rims with 265 65 17 Winters mounted. Both these tire sizes have close to the same diameter.

It would be nice to know if the rims fit on my 4R before I go and look at it... Without having to determine fitment on site! Thanks for any advice.

 

[poleclimber63]

I still have a steel spare years after doing the 231mm upgrade. I had a flat this Summer, luckily on the rear. However, I have now come across an opportunity to replace this spare with a 4th gen rim with a 265 65 17 mounted. Will this rim fit on my 3rd gen 4R?

I run LTD 16" rims in the Summer with 265 70 16 all seasons and Sequoia 17" rims with 265 65 17 Winters mounted. Both these tire sizes have close to the same diameter.

It would be nice to know if the rims fit on my 4R before I go and look at it... Without having to determine fitment on site! Thanks for any advice.

bump..... comments?

 

[Pongau]

Toyota Parts requiring a Vin # to order the Tundra rotors

Having an issue trying to order the Correct Rotor for this swap. Local Toyota Parts Guy is giving me a problem about ordering the rotor for a 2005 Toyota Tundra 4x4 V-8. He says there are 2 part#s and he needs a vin# to make sure I get the right part. I don't have a tundra, I have a T4R. can someone point me in the right direction?

 

[JRZEE2000TR4LTD]

Having an issue trying to order the Correct Rotor for this swap. Local Toyota Parts Guy is giving me a problem about ordering the rotor for a 2005 Toyota Tundra 4x4 V-8. He says there are 2 part#s and he needs a vin# to make sure I get the right part. I don't have a tundra, I have a T4R. can someone point me in the right direction?

1st page of the thread shows a picture of the part # 43512-0C011. You're going to spend WAY more locally then you would online.

https://parts.camelbacktoyota.com/p...PONENTS&subgroup=FRONT BRAKES&component=ROTOR

 

[Spktyr]

I still have a steel spare years after doing the 231mm upgrade. I had a flat this Summer, luckily on the rear. However, I have now come across an opportunity to replace this spare with a 4th gen rim with a 265 65 17 mounted. Will this rim fit on my 3rd gen 4R?

I run LTD 16" rims in the Summer with 265 70 16 all seasons and Sequoia 17" rims with 265 65 17 Winters mounted. Both these tire sizes have close to the same diameter.

It would be nice to know if the rims fit on my 4R before I go and look at it... Without having to determine fitment on site! Thanks for any advice.

Depends on which of the 4th gen wheels this is. When I tried to put some on mine, the clearance (or lack thereof) between the front upper control arms and the tire inner sidewall on each side made me go get some spacers immediately - I had clearance but so little that sidewall flex could have sent the sidewall into the UCA to be raked and ripped by the UCA. Here's my prior thread on it, hope it helps: http://www.toyota-4runner.org/3rd-g...n-wheel-swap-lug-nut-tire-size-questions.html

 

[Spktyr]

Having an issue trying to order the Correct Rotor for this swap. Local Toyota Parts Guy is giving me a problem about ordering the rotor for a 2005 Toyota Tundra 4x4 V-8. He says there are 2 part#s and he needs a vin# to make sure I get the right part. I don't have a tundra, I have a T4R. can someone point me in the right direction?

There currently is one on Amazon's Warehouse Deals for under $50. There used to be three until a couple minutes ago. :naughty:

https://www.amazon.com/gp/offer-listing/B00KTIFD5U/ref=dp_olp_all_mbc?ie=UTF8&condition=all

 

[nchacon1984]

Round two of installing my amazon tbu kit after my first set of calipers defective. What were the odds of that? Anyway, just received the new ones but these came with some copper washers...anyone know where they go? Im assuming to the two bolts to mount the caliper.

 

[Spktyr]

Round two of installing my amazon tbu kit after my first set of calipers defective. What were the odds of that? Anyway, just received the new ones but these came with some copper washers...anyone know where they go? Im assuming to the two bolts to mount the caliper.

I just ordered mine - how were your calipers defective?