Just installed Accessorides remote start
- Thread starter Moose568
- Start date
Register to hide this ad
oljedi11950
New member
Accesorides
My old skinny ass loves it ! Best & cheapest mod yet , dealer would have been almost 500$ ! I just started mine line of sight 100 yds , which on my son's 11' almost be 100 ft !:clap2:
My old skinny ass loves it ! Best & cheapest mod yet , dealer would have been almost 500$ ! I just started mine line of sight 100 yds , which on my son's 11' almost be 100 ft !:clap2:
Does it work while using the app or is it a separate key fob? Is that only the OEM version that works with the standard key/Toyota app?
Sent from my iPhone using Tapatalk
Great! Looking to install the 2020 model on my car, I'm still checking for a variant that will do a perfect job.
Last edited:
I am still waiting for my Accessorides kit to be delivered, but from the videos on YouTube nothing needs cut. The wiring is to have a pin switch for the hood. I think you would just ground the wire if the switch will not be used. A sticker is provided to put under the hood to inform ones that a remote start is on the rig. You can use the oem fob as well as an app.
Windsailor97
Junior Member
I installed an MPC remote start with the G key (non- push button)fob start and though it was mostly plug and play, the wire connections required were complicated for a novice
It came with a T Adaptor. You don't have to splice, but you have to cut some rubber/tape on the harness to free up the TPMS wire. It was fairly easy and the included instructions were pretty clear to understand
Kamalani Mahie
New member
Follow the directions but if I remember from my install correctly, if you have an OEM hood sensor/switch, then you need to cut that wire they call out in the directions. If you don't have an OEM one, leave the wire intact. This was on my 2015 Trail with the G-key. I think the kit comes with a hood sensor/switch that you can choose to install if you want, but I didn't install it.
