Lift advise for future bumpers

[Kmurt]

Undecided about which front coils to go with. 881 or 883. Eventually I will have an ARB or shrockworks up front. Possibly winch too.

Toytec says 881s are good for stock weight 2"-2.5" lift. 883 for 200+ pounds 2.5"-3" lift.

Anyone run the 883s? I'm mostly likely going with 891 in the rear for the weight of the plate bumper+tire carrier and occasional dirtbike hauls.

So far:

Front - 883/881? Tundra Bilsteins

Rear - 891/ Bilstein 5100

Diff drop

 

[ralatkins]

Having expericed with the tacoma and tundra billies I assure you the tundras are better. Tacomos are too soft and mushy IMO

Dan could have sold me Tundra 5100's, but he suggested the Tacoma's instead. But I have stock front and don't plan on adding a bumper. OP, it doesn't hurt to call. Or maybe [MENTION=87036]YotaDan[/MENTION] can chime in?

 

[Kmurt]

Ended up ordering 883/891 with diff drop from Toytec last night. Got 10% with black friday code. Ordered Tundra Bilsteins front and 5100s for the rear from Wheelers Offroad.

Can't wait to see the turnout.

 

[Jmabry66]

Lift

So I don't have aftermarket bumpers yet... I got the adjustable front shocks on the ultimate lift and they should help when I do put the heavier bumper on. Here is my truck with 31's and the lift with all-terrains and then with 33's and mud tires

 

[Jmabry66]

Other

Sorry could load multiple...