My 98 Limited

[G_Raw]

Those shifters look really clean my bradduh. 4.7 and 2.56 gear ratios? What tcases you running?

 

[busmup808]

Those shifters look really clean my bradduh. 4.7 and 2.56 gear ratios? What tcases you running?

I went with Marlin adapters and their 4.70 gears [emoji3541]


Sent from my iPhone using Tapatalk

 

[G_Raw]

I went with Marlin adapters and their 4.70 gears [emoji3541]


Sent from my iPhone using Tapatalk

Am I crazy? I thought our tcases were 2.28? I know 4.70 for the dual case is normal. You got a 2.56 in your stock case?

 

[busmup808]

Am I crazy? I thought our tcases were 2.28? I know 4.70 for the dual case is normal. You got a 2.56 in your stock case?

2.28 came in gear driven t-cases. You can upgrade to the 4.70. Our trucks came with chain driven t-cases which is geared 2.56. From what I read anyway.


Sent from my iPhone using Tapatalk

 

[busmup808]

I turned the upper knob down .030 and lower knob .020. Also tapped all 3 holes

Sent from my iPhone using Tapatalk

 

[Bad Luck]

Am I crazy? I thought our tcases were 2.28? I know 4.70 for the dual case is normal. You got a 2.56 in your stock case?

We share the same transfer case as tacoma's and fj cruiser's. 2.57 low range gear ratio.

EDIT: I've seen 2.56 and 2.57 about the same amount. Just depends on the source.

 

[busmup808]

We share the same transfer case as tacoma's and fj cruiser's. 2.57 low range gear ratio.

I’ll put it back on the CNC and put +.01. [emoji23]


Sent from my iPhone using Tapatalk

 

[Bad Luck]

I’ll put it back on the CNC and put +.01. [emoji23]


Sent from my iPhone using Tapatalk

Just put 2.5X then you can't be wrong lol I've seen 2.56 and 2.57 about the same amount but for some reason my mind remembers it as 2.57

 

[HiluxSurf SSR-G]

it's 2.566 to be exact

We share the same transfer case as tacoma's and fj cruiser's. 2.57 low range gear ratio.

EDIT: I've seen 2.56 and 2.57 about the same amount. Just depends on the source.

 

[busmup808]

Just put 2.5X then you can't be wrong lol I've seen 2.56 and 2.57 about the same amount but for some reason my mind remembers it as 2.57

In Mechanical Engineering one thousand of an inch can make a big difference depending on tolerances, but dis iz just fo show


Sent from my iPhone using Tapatalk

 

[dork0900]

Those are some great looking shift knobs!

 

[busmup808]

Those are some great looking shift knobs!

Much Mahaloz [emoji1686]


Sent from my iPad using Tapatalk

 

[busmup808]

When I had my 80 series LC, I had some DUCK covers by SOR. They are canvas material that just worked with the seasons in the PNW. I just saw a video last week that some guys in Australia [emoji1037] had some covers of the same material just wheeling away. I reached out to the USA branch and they said they had 1 in stock. I immediately gave him my card and purchased it. I just installed them and it’s way better than not having a cover at all.

Sent from my iPad using Tapatalk

 

[busmup808]

Sent from my iPad using Tapatalk

 

[busmup808]

My RADesigns triple sticks came in and I just had to install my brass knobs I made

Sent from my iPad using Tapatalk

 

[busmup808]

More parts

Sent from my iPad using Tapatalk

 

[busmup808]

Brah took me a month jus to find a tcase foa my duals. Unreal! I called home in HI & they didn’t have and da people who had didn’t want to sell. Usually my friends call me from back home for parts, but I guess not no moa. I picked up a whole forward shift case for $300. I still have to convert it to top shift when my gears come in. I’m going wit da 4.7 Marlin Comp.

Sent from my iPad using Tapatalk

 

[busmup808]

My gears came in. Now I’m just waiting on the rear adapter to complete the dual t-cases. I just wished Marlin didn’t stop making built cases. Now I just have to tear it apart and install

Sent from my iPhone using Tapatalk

 

[busmup808]

Been working on the wife’s truck lately,while I wait for parts to come in. Did her valve-cover gasket this past weekend. I am about to do mines soon as well. I love working on her motor, there is so much room.

Sent from my iPad using Tapatalk

 

[busmup808]

Noticed a crack in my Metal Tech Fuel Can Holder. It is cracking at the weld. Didn’t expect this from a reputable company.

Sent from my iPad using Tapatalk