Dylan
Member
New Wires - Problem Solved!!
So I had previously taken my rig to a local shop that had a Free CEL diagnostic. I'm not trying to judge, but this was on a saturday and the guy who helped me didn't seem too experienced there. He was the only one there at the time and came back saying it was the Knock Sensor (which I understand could be the wire, etc, etc).
Anyway, the light has been on for a while. Yesterday I swapped out new plugs and wires. The plugs were only about a year old, but I figured I would put new ones in since I had extras. The wires had been on there quite some time, at least 10 years.
Anyway, I go to start my car for the first time today and the CEL is no longer on. Engine performance seems much better, not sluggish anymore and no loss of power. Could this have been the problem all along, the wires? I drove the car about 3 miles to work, getting up to about 3k RPM at one point gunning it, up to about 50 mph. It hasnt driven like this in quite some time. The CEL used to come on after it hit about 1,500 RPM shortly after accellerating. It still hasn't come on. Any thoughts??
One other note...I did use 89 octane gas this week, I usually use regular.
So I had previously taken my rig to a local shop that had a Free CEL diagnostic. I'm not trying to judge, but this was on a saturday and the guy who helped me didn't seem too experienced there. He was the only one there at the time and came back saying it was the Knock Sensor (which I understand could be the wire, etc, etc).
Anyway, the light has been on for a while. Yesterday I swapped out new plugs and wires. The plugs were only about a year old, but I figured I would put new ones in since I had extras. The wires had been on there quite some time, at least 10 years.
Anyway, I go to start my car for the first time today and the CEL is no longer on. Engine performance seems much better, not sluggish anymore and no loss of power. Could this have been the problem all along, the wires? I drove the car about 3 miles to work, getting up to about 3k RPM at one point gunning it, up to about 50 mph. It hasnt driven like this in quite some time. The CEL used to come on after it hit about 1,500 RPM shortly after accellerating. It still hasn't come on. Any thoughts??
One other note...I did use 89 octane gas this week, I usually use regular.
Last edited: