Ride is looking good!! What suspension setup are you running?
Post your LIFTED pix here!
- Thread starter B'klyn_Mike
- Start date
Ride is looking good!! What suspension setup are you running?
CalebGibsonArt
New member
Awesome! 285's it is haha
Should be installed Monday. I'll be sure post some pics.
Thanks, it looks awesome, I like how it still retains a bit of the factory rake without being completely level.
tackleberry1145
New member
Thanks. I'm not a fan of levelling vehicles that actually get used. ;-)
2016 4Runner SR5
Senior Member
So looking to sell / trade my wheels and tires. Less than 6000 miles on the combo, zero issues, no plugs or patches, just looking for something different. Tires are BFG KO2 and are 285/70/17 Wheels are FN Wheels FX Pro 17x8 Must be local, not looking to ship. Howard County Maryland
Attachments
4runforfun
New member
Looks great! Have any trouble with the alignment after going 3" up? Also did you change UCAs?
Looks great Man! How is the ride, power afterwards and of course MPG.
2016 4Runner SR5
Senior Member
Anyone here running a 315/65/17 or something close?
Last edited:
sent you a message with my email address
I am interested in your rims and wheels, and I can pic them up.
Thanks,
Jeff
gdvan01
New member
I found a stock (white) 4Runner to park next to real quick to get an idea of how different mine is with the Bilstein 5100's and daystar rear spacer. I'm on stock rubber for now ( I just bought 4 new tires for the autoX car less then 5 min ago ), so I'm guessing once I get the 285's on I will no longer fit in my garage
Looks like the "bark park" in the complex where I live.
Oxygen?
YEP!
My son's girlfriend was living there while they were building a house. I'm not far from you though. I'm in the Hallsley subdivision off Old Hundred Rd!
My son's girlfriend was living there while they were building a house. I'm not far from you though. I'm in the Hallsley subdivision off Old Hundred Rd!
DeepSea
New member
Looks perfect :cheers:
5100 with Toytec springs
Here is my lift spec:
-- Bilstein 5100 front and rear shocks (front shocks using bottom setting, 0 lift)
-- 521600 Toytec Front coils (2.5 inch lift)
-- Toytec "Super flex" rear coil springs (2 inch lift)
-- JBA UCA (caster set at 4)
-- Spidertrax 1.25" wheel spacers
-- Still on 265 K02 tires.
The ride is so better much than stock, it improves the nose dive and body roll, turn in feel sharper and remain close to stock ride quality. You do feel the bump on the road a little more, but not an issue for me.
Took me 8 hrs to install this setup with beer break, but worth every minutes. Highly recommend this setup.
Here is my lift spec:
-- Bilstein 5100 front and rear shocks (front shocks using bottom setting, 0 lift)
-- 521600 Toytec Front coils (2.5 inch lift)
-- Toytec "Super flex" rear coil springs (2 inch lift)
-- JBA UCA (caster set at 4)
-- Spidertrax 1.25" wheel spacers
-- Still on 265 K02 tires.
The ride is so better much than stock, it improves the nose dive and body roll, turn in feel sharper and remain close to stock ride quality. You do feel the bump on the road a little more, but not an issue for me.
Took me 8 hrs to install this setup with beer break, but worth every minutes. Highly recommend this setup.
Attachments
Last edited:
SDHQ OFFROAD
New member
2016 4Runner SR5
Senior Member
Love it! Just ordered my 295 Ridge Grapplers to replace my 285 KO2 tires. Can't wait!
Are you at the 3" mark? If so, did you have to trim or cut? My current wheels are 17x8 with 4.5 backspacing and 0 offset. Thinking about going up to a 17x9 with 4.5 backspacing and -12 offset for a wider more aggressive look but not sure yet.
