Post your LIFTED pix here!

.....
 

Attachments

  • 1504268452388.jpg
    1504268452388.jpg
    30.3 KB · Views: 3,444
Looks nice. I’m looking into the same lift. According to Wheeler’s this would lift you 2.5 front and 1.5 rear. I assume you left the 5100s at 0? Did you install new UCA’s?


Sent from my iPhone using Tapatalk

Yes, the front 5100s were set to 0. I did not install new UCAs and according to the shop the alignment was in spec and it drives very well.
 
I can finally post in the lifted thread!! After a bunch of lurking and comparing tons of photos I finally settled on the following and I am very pleased with the results.

5100's all around with factory coils:

Front set at 1.75"
Cornfed rear 1" spacer
 

Attachments

  • lifted.jpg
    lifted.jpg
    52.4 KB · Views: 3,314
Kings all around...2.5" Ext Travel in front with Total Chaos UCA's. Kings in the back with 1.5" OME springs. 285 Ridge Grapps.
 

Attachments

  • IMG_1904.jpg
    IMG_1904.jpg
    137.3 KB · Views: 3,294
Finally had a chance to get some photos up:

Bilstein 5100s all around, front at 0
Wheeler's T1 front with 1/4" spacer driver's side (approx 2.5")
Wheeler's T13 rear with 10mm OME trim packer driver's side (approx 1.5")
Factory UCAs (aligned perfectly)
Toyota TRD Pro wheels
Firestone Destination A/T 285/70 17 (33")

DSC_0015-XL.jpg


DSC_0014-XL.jpg


DSC_0017-XL.jpg


DSC_0016-XL.jpg


Cross posted on the Wheeler's T1/T13 thread and over on 4runners.com
 
Looks nice. I’m looking into the same lift. According to Wheeler’s this would lift you 2.5 front and 1.5 rear. I assume you left the 5100s at 0? Did you install new UCA’s?


Sent from my iPhone using Tapatalk

I did the same lift and am at 0 on the Billies and no UCAs. See post just above this one.
 
Before and after.
Traxda level kit with G2 spacers.
 

Attachments

  • 20171217_094554.jpg
    20171217_094554.jpg
    140.8 KB · Views: 3,458
  • 20171221_091802.jpg
    20171221_091802.jpg
    134.2 KB · Views: 3,515
  • 20171221_091748.jpg
    20171221_091748.jpg
    136.8 KB · Views: 3,451
1.5/1 Cornfed spacers.

Before:

<img src="http://i116.photobucket.com/albums/o21/acurawei/20171106_133833_zps1yy2v4rj.jpg" border="0" alt=" photo 20171106_133833_zps1yy2v4rj.jpg"/>

After:

<img src="http://i116.photobucket.com/albums/o21/acurawei/20171219_104614_zps59qv8pb4.jpg" border="0" alt=" photo 20171219_104614_zps59qv8pb4.jpg"/>

<img src="http://i116.photobucket.com/albums/o21/acurawei/20171221_164111_zpselzu1gfj.jpg" border="0" alt=" photo 20171221_164111_zpselzu1gfj.jpg"/>
 
More pics

Queen, Nm and trail 201
 

Attachments

  • IMG_20171004_201805365~2.jpg
    IMG_20171004_201805365~2.jpg
    134.6 KB · Views: 3,141
  • IMG_20171004_201831564~2.jpg
    IMG_20171004_201831564~2.jpg
    143.9 KB · Views: 3,125
Just lifted my 2017 4Runner with Icon's 2.5 Ext. Travel coilovers & Delta Joint UCA's in the front.
In the rear, we have the Icon V.S. 2.0 rear shocks, billet rear links, and 3'' Icon Overland coil spings.

OjEJkPFh.jpg


HGTCQYSh.jpg


UXHt5KOh.jpg
How do you like the ride? Have been looking at this setup for some time. What tire size you running on those Toyo's?

Sent from my SM-G920V using Tapatalk
 

Members online

Forum statistics

Threads
278,310
Messages
3,554,079
Members
248,016
Latest member
Advally Service

Trending content

Back
Top