Finally got around to snapping some pics after the snow (then rain) storms the past week -- managed to find some bigger mud puddles after taking the pics!
I went with the Toytec Ultimate kit but had them build up the front COs with the new 5th Gen specific Bilsteins (P/N 24-196499). Rides great and if there is a valving difference, it didn't make the ride too stiff in my opinion (that was Toytec's concern up front). Light Racing UCAs up front and a 1" differential drop as well.
I ended up with almost 2.5" in the rear and just under 3" in the front. I'm hoping the rear end settles down closer to 2" and may crank up the COs just a bit down the road -- since the rear is a little taller than I expected, I do have ~1.5" of rake (which I don't really mind, but I would like it to be closer to 1"). Last pic is of my rig next to Egstyle's -- hard to tell but his nose is just a little taller than mine (he's running bigger tires than my 285s).
My 285/70R17 Duratracs don't rub at all with the mudflaps off but I put them back on this week since I was getting a ton of snow/slush on the running boards during the snow storm -- rubbing pretty good when backing up and turning and also a bit when turning into parking lots. I asked them to align with +4 caster but it ended up at 3.4 I think. Once I crank up the COs I'll have another alignment done and make sure the caster is set higher.