Also got her some fresh juice. Loving the larger 27F. Nearly 1000 CCAs
Where did you happen to find that power block?
"Snowball" Build Thread
- Thread starter jonathansdotson
- Start date
Where did you happen to find that power block?
jonathansdotson
New member
I went with the -10mm offset. Those in conjunction with my 1.25" Spidertraxx and I only have rubbing against the body mount at full turn in reverse.
I'm sure you appreciate getting marginally better MPGs, though!
I think you'll be very happy with that set up. I don't live in Knoxville anymore, but I still visit around the holidays. Miss that place! If you're referencing the fuse block, it's made by Blue Sea Systems and you can find them on Amazon. The battery I bought through a groupbuy here on the forums.
jonathansdotson
New member
Most recent update:
Installed "new" CV axles from CVJ. Running flawless so far!
Also installed new Moog LBJs. Also flawless, and greaseable. If you ever want to try this, I recommend having at least a four foot cheat bar...
Installed "new" CV axles from CVJ. Running flawless so far!
Also installed new Moog LBJs. Also flawless, and greaseable. If you ever want to try this, I recommend having at least a four foot cheat bar...
jonathansdotson
New member
The Christmas season has given me a lot more down time, so I've been able to get a few projects done.
1) Finally installed an adjustable panhard from Sonoran Steel. Fits like a glove and clearly helped re-center my axle.
2) A few weeks ago, I sprayed a debugging solution on the front of my 4R before cleaning it and it took the Spar Urethane clear coat off my headlights. They looked hideous, so I took this time to refinish them.
3) I decided that the lightbar sticking out of my lower grill was a little too tacky (girlfriend was kind enough to keep reminding me..). So I decided to adjust it further back on its mounts behind my bumper, and I replaced the lower grill that I had trimmed with a new one. Now it sits nice and hidden behind my grill until I unleash it :thumb3:
Note: If you've paid any attention to my previous posts, you'll be able to tell that the lower, middle portion of my bumper is no longer black. Well, the Plastidip finally started to fade and was chipping away from rocks flinging up on the road. Eventually, I'm gonna coat that area again but probably with some kind of semi textured bed liner. Thoughts?
1) Finally installed an adjustable panhard from Sonoran Steel. Fits like a glove and clearly helped re-center my axle.
2) A few weeks ago, I sprayed a debugging solution on the front of my 4R before cleaning it and it took the Spar Urethane clear coat off my headlights. They looked hideous, so I took this time to refinish them.
3) I decided that the lightbar sticking out of my lower grill was a little too tacky (girlfriend was kind enough to keep reminding me..). So I decided to adjust it further back on its mounts behind my bumper, and I replaced the lower grill that I had trimmed with a new one. Now it sits nice and hidden behind my grill until I unleash it :thumb3:
Note: If you've paid any attention to my previous posts, you'll be able to tell that the lower, middle portion of my bumper is no longer black. Well, the Plastidip finally started to fade and was chipping away from rocks flinging up on the road. Eventually, I'm gonna coat that area again but probably with some kind of semi textured bed liner. Thoughts?
Attachments
Last edited:
