So Cal 4Runner BS Thread
- Thread starter TK-422
- Start date
CrazyNorwegian
New member
Transmit as in the it can not be heard from another radio on the same frequency? If you are using simplex (radio to radio communication) and not using a repeater, make sure the repeater offset is turned off. I believe it's #25 on the menu. If that doesn't work you can try a factory reset on it. But it could also be a bad transmitter.
mwray8909
New member
I did the factory reset. And the repeater is off. Oh well. Thanks for the quick response!
Sent from my SAMSUNG-SM-G890A using Tapatalk
surfbm
New member
I got sick the day before and couldn't make it... I was really bummed!
surfbm
New member
I was thinking the same thing! i went over to TW and found the thread there just to make sure i haven't been living in a dream world...
PeoplecallmeIan
New member
What happened to the off road fest thread?
oh..people came here to ask also.
oh..people came here to ask also.
MACT4R
Senior Member
I was wondering too and checked tw. Can't wait to hey off work. Be there this evening. Got whiskey!!
Sent from my SM-G930P using Tapatalk
Dezert4Runner
Senior Member
Any body know what site numbers specifically Miah booked? I'm here and found a spot but I don't want to get kicked out after my camp's all set up!
EddieV4runnin
New member
Runnnig late but on my way should be there around 11
mr1337357
New member
952ndgen4runner
New member
95 2nd gen Removable doors
Hey guys I'm new to this forum. I've looked on this forum to answer a lot of questions I've had in the past but never made an account because I could always find my answers to the questions I have had. So I had been doing some looking around to see what people had suggested for removable doors. I finally settled to cut my hinge pins and make some removable pins. My next problem was the wiring, I have electric windows and locks and mirrors so as you can imagine there was a lot of wires going in and out of the doors. I wired harnesses and they are weatherproof. My last problem is that my windows themselves do not physically roll up, I've heard things like reset your actuators or regulators but I have no clue where they are and how I would reset them or anything like that. I'd really appreciate the help, I haven't been able to roll up both of my driver side windows for a couple months and all of my other windows won't roll down, and I'm guessing all of you know how much it sucks if your back window doesn't roll down. Any help would be greatly appreciated!!
Hey guys I'm new to this forum. I've looked on this forum to answer a lot of questions I've had in the past but never made an account because I could always find my answers to the questions I have had. So I had been doing some looking around to see what people had suggested for removable doors. I finally settled to cut my hinge pins and make some removable pins. My next problem was the wiring, I have electric windows and locks and mirrors so as you can imagine there was a lot of wires going in and out of the doors. I wired harnesses and they are weatherproof. My last problem is that my windows themselves do not physically roll up, I've heard things like reset your actuators or regulators but I have no clue where they are and how I would reset them or anything like that. I'd really appreciate the help, I haven't been able to roll up both of my driver side windows for a couple months and all of my other windows won't roll down, and I'm guessing all of you know how much it sucks if your back window doesn't roll down. Any help would be greatly appreciated!!
