so I installed the CBI Covert Front Bumper and WTF?

[Gouranga]

Video for info on this bumper from CBI - go to the 8:50 mark, he talks about skid plates and not affecting the install location. Login • Instagram

he never talks about the oem skid plate not effecting install
what are you smoking man.. he even says they have it OFF lol wonder why its off huh...... he says they are waiting for their aftermarket skid plates
because the OEM DOES NOT FIT

 

[Gouranga]

and we already told you. You are going to have to trim your skid plate to get it to fit around the lip area.

Or you can use spacers.

you are the only one who said that everyone else said IT WILL BOLT RIGHT UP... not true and also nah man it will be way too much tripping and deform the whole oem skid plate its a good 3in id have to take off because u gotta lift it upwards to match with the holes and the angle of it

also the corners also will be hitting and are too wide

 

[tifflieger]

its impossible for a trd pro skid plate on a venture because all ventures have kdss and the skid plates on pros cant fit them cuz of things in the way sorry u didnt know that

My '21 Venture doesn't have KDSS

 

[mrblah]

oh really ?

shows how much you know about a product you dont actually own..
the square window is just another window to access it as well as the sides

Nice try. Where your hand is, and where that opening is, is not where the "skid plate" goes. That is where the filler plate typically resides. Your original statement was, that the skid plate goes there, which is FALSE.

In your previous pictures, you didn't present a picture of any additional cutouts on the CBI bumper. You only presented a picture with winch access holes next to the fairlead and a area with the CBI logo is. The CBI logo area is not an access hole. and I still don't know what hole you are sticking your hand in. Learn to post better pictures.... or better yet, stop posting irrelevant pictures.

 

[Gouranga]

Nice try. Where your hand is, and where that opening is, is not where the "skid plate" goes. That is where the filler plate typically resides. Your original statement was, that the skid plate goes there, which is FALSE.

In your previous pictures, you didn't present a picture of any additional cutouts on the CBI bumper. You only presented a picture with winch access holes next to the fairlead and a blocked off portion below it. We can only go by what pictures and information you present. Not my problem, that you have issues on how to communicate. LEARN2POST.

you truely are a clown

i said that the skid plate would hit the lower half of the middle square window and if you look at my picture if i was to move it 3in upwards it would but since i cant do that i cant take a picture to show you since im prevented by moving it upwards by the lip

i explained that and you guys kept insisting oh it will bolt right up.. what a waste of time.. people talk about the object they dont have in their hands like me..... i was hoping somoene who DOES have this bumper and could confirm but no one seem to

 

[Gouranga]

You forgot about the other part of your original statement, "all ventures have KDSS".

That part of your statement is also false.

all ventures come stand with kdss standard at least in canada.

edit i see that in the USA they dont ...in canada they all do

 

[lewdog998]

Yall are not focusing on the issues...
Every time I eat asparagus my pee smells really bad...does anyone else have this issue?

 

[mrblah]

you truely are a clown

i said that the skid plate would hit the lower half of the middle square window and if you look at my picture if i was to move it 3in upwards it would but since i cant do that i cant take a picture to show you since im prevented by moving it upwards by the lip

i explained that and you guys kept insisting oh it will bolt right up.. what a waste of time.. people talk about the object they dont have in their hands like me..... i was hoping somoene who DOES have this bumper and could confirm but no one seem to

Do what you want to do to make yourself feel better about yourself.

These are the options presented to you.

1. Dremel the leading edge as someone has already suggested you do.

2 try bolting it up, using stock existing hardware if the holes line up OR Use longer bolts and a spacer, which we suggested you to do.

3. try to readjust your bumper, as someone has already suggested you do.

4. call CBI as someone has already been suggested you do.

5. Or you can continue to cry on the internet as you have continued to do so

6. or do nothing, and pretend this will magically fix itself.



I'm betting you will pick option 5 or 6.

FYI, i heard people who insult random strangers on the internet when they don't get the answers they want to hear, have penis envy. Well, if it is true...there is help for you.

 

[mrblah]

Yall are not focusing on the issues...
Every time I eat asparagus my pee smells really bad...does anyone else have this issue?

i eat asparagus when i go camping at night..and pee all around the camp site, keeps the predators at bay.

It doesn't quite work when I'm at home..i still find Jehovah's witness knocking at my door, and my carpets smell like asparagus.

 

[Saker]

This just keeps on giving.
I’m learning sooooooo much here.

opcorn:

 

[mrblah]

This just keeps on giving.
I’m learning sooooooo much here.

opcorn:

I would hope so.

My sole existence to entertain the unruly masses...lane:

 

[lewdog998]

This just keeps on giving.
I’m learning sooooooo much here.

opcorn:

Yes, there is much to be gained here...for instance...I challenge you to use todays "word of the day" in as many conversations as possible....

"MOIST" is todays word of the day.

Good luck and avoid CV joint failure by keeping the joints moist.

 

[Bmnorm2]

Crash beams are for Pu**ys....next your going to tell me I should wear a seatbelt and stop snorting lines off the dash while driving!

:wow2:

fair enough

 

[Saker]

…..

the square window is just another window to access it as well as the sides

So, my question is …. You are calling this an access to the winch.
This is below the winch area and you can only stick a couple of fingers at most in maybe 3”.
How again is this an access window?

The only way to access the winch from there would be to remove that decorative piece.

 

[mrblah]

So, my question is …. You are calling this an access to the winch.
This is below the winch area and you can only stick a couple of fingers at most in maybe 3”.
How again is this an access window?

The only way to access the winch from there would be to remove that decorative piece.

Some people have tiny hands.

You know what they say about tiny hands.

 

[salsanacho]

I'm really curious if this ends up getting resolved or not...

 

[Gouranga]

Do what you want to do to make yourself feel better about yourself.

These are the options presented to you.

1. Dremel the leading edge as someone has already suggested you do.

2 try bolting it up, using stock existing hardware if the holes line up OR Use longer bolts and a spacer, which we suggested you to do.

3. try to readjust your bumper, as someone has already suggested you do.

4. call CBI as someone has already been suggested you do.

5. Or you can continue to cry on the internet as you have continued to do so

6. or do nothing, and pretend this will magically fix itself.



I'm betting you will pick option 5 or 6.

FYI, i heard people who insult random strangers on the internet when they don't get the answers they want to hear, have penis envy. Well, if it is true...there is help for you.

this guy trying to give me advice on what to do lol
shows how clueless you are.. i got my answer on my own before i even made this thread,,, i made a thread to let others know that the OEM skidplate wont fit with the covert bumper .. then people try to tell me that it does i never came here to ask what to do but to let others know this thread only dragged this long because fools trying to convince me otherwise without being at the shop seeing that it doesnt fit.. then having to show you clowns pictures just to prove that it doesnt fit LOL

 

[Gouranga]

So, my question is …. You are calling this an access to the winch.
This is below the winch area and you can only stick a couple of fingers at most in maybe 3”.
How again is this an access window?

The only way to access the winch from there would be to remove that decorative piece.

the pic with my fingers through was taken with the window closed and held by 4 bolts.. if you undo those 4 bolts the whole window comes out and you can put two hands in there and mess around with the winch

 

[mrblah]

this guy trying to give me advice on what to do lol
shows how clueless you are.. i got my answer on my own before i even made this thread,,, i made a thread to let others know that the OEM skidplate wont fit with the covert bumper .. then people try to tell me that it does i never came here to ask what to do but to let others know this thread only dragged this long because fools trying to convince me otherwise without being at the shop seeing that it doesnt fit.. then having to show you clowns pictures just to prove that it doesnt fit LOL

:crazy:

 

[Gouranga]

In your previous pictures, you didn't present a picture of any additional cutouts on the CBI bumper. You only presented a picture with winch access holes next to the fairlead and a area with the CBI logo is. The CBI logo area is not an access hole. and I still don't know what hole you are sticking your hand in. Learn to post better pictures.... or better yet, stop posting irrelevant pictures.

cant be srs i mean why am i surprised from a guy whos username is blah

instead of demanding pictures maybe dont open your mouth without having first hand experience on the subject

do you have this bumper ? no then stfu simple as that why are giving me advice,, i said from the start it doesnt fit not bold right on at least

i did contact CBI directly i mentioned this from the start they even confirmed LOL

in one video it shows they have the skid plate on but NO bumper

in a diff video (the instagram one) theres a bumper but no skid plate

2+2 ?

what a fkn clown